Three-piece forged wheel from Rotiform's CustomSpec program. The VCE-T offers staggered fitment capability with 17 finish options. Available 16-24" to custom specification.
Finishes
Full price, fitment check and delivery estimate within 24h.
03 /Specifications
This wheel is available in multiple fitments. Final size, offset and bolt pattern are to be confirmed with our manager.
Need exact specs for your car?
We'll include the confirmed fitment, full spec sheet and available documentation with your quote.

04 /Finish
Each finish is hand-applied and quality-checked before shipping. Custom finishes available on request add 2 weeks to lead time.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Full specifications
Rotiform VCE-T CustomSpec — Staggered-Fitment Configuration of the VCE Design
Three-Piece Forged Construction Engineered for Asymmetric Front/Rear Sizing
Rotiform VCE-T CustomSpec addresses staggered fitment requirements directly. Where the standard VCE serves symmetric four-corner setups, the VCE-T is engineered from the outset for vehicles that run a narrower front and wider rear — Porsche, Ferrari, and wide-body European cars being primary applications. The three-piece architecture makes asymmetric widths straightforward: the barrel component is fabricated to the required front or rear dimension while sharing the same forged center section. Each set is ordered specifying front and rear dimensions separately.
Rotiform VCE-T Design: Multi-Spoke Face Shared with VCE, Barrel Configured to Order
The VCE-T uses the same forged center face as the VCE — flowing curved spokes, centered hub, defined concave dish — combined with a barrel assembly sized to staggered fitment requirements. The spoke curvature and face depth are consistent between front and rear, so the wheel appears visually matched regardless of barrel width difference. The outer lip profile on each piece is finished to match, maintaining set coherence despite dimensional asymmetry.
Rotiform VCE-T Engineering: Three-Piece Forged Architecture
Three-piece construction for the VCE-T means a forged aluminum center, inner barrel ring, and outer barrel ring joined by hardware. The barrel halves are sourced in widths matching the submitted front and rear specifications, then assembled with the center to produce finished front and rear wheels. This manufacturing flexibility is why three-piece construction is specified for staggered-fitment programs — barrel changes do not require a new center forging.
VCE-T CustomSpec Technical Notes
Construction: three-piece forged. Order requires separate front and rear dimensional specifications (diameter, width, offset). Bolt pattern is constant across front and rear. Lead time confirmed at order. Rotiform verifies staggered fitment compatibility for the submitted vehicle before production.
VCE-T CustomSpec Finish Selection
Finishes available match VCE availability: Matte Black, Brushed Titanium, Polished, Gloss Gunmetal, and others confirmed at order. Staggered sets are finished identically across front and rear for set consistency.
VCE-T CustomSpec Applications
Documented fitments include Porsche 991 GT3, Ferrari 458, and BMW M6 Gran Coupe — vehicles where rear tires are substantially wider than front. The VCE-T's three-piece flexibility accommodates the specific offset and width combinations these platforms require.
Any Vehicle, Any Specification
The VCE-T CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certification
Documents differ by model and country. We check them for your exact wheel before you pay — and tell you upfront what's available.
01
Clear about what you get
Every quote states exactly what you're getting: brand, model, finish and documents.
02
Documents checked before payment
We confirm which certificates (TÜV, JWL, VIA) exist for your model and send them with the quote.
03
Fitment verified
Offset, PCD and brake clearance checked for your exact car.
04
Registration in your country
Tell us where the car is registered — we'll check what's needed and what we can provide.

Need documentation for your wheel?

Rotiform is an American premium wheel brand founded in California in 2009, established as a specialist in multi-piece monoblock and custom wheel design for the performance and luxury tuning market. Since December 2025, Rotiform has been part of Blue Design Group, a holding that consolidates premium wheel and automotive design brands, bringing additional engineering and design resources to Rotiform's development pipeline. The brand has established a motorsport presence through its role as a technical partner to Ferrari Challenge and GT programme teams, lending engineering credibility that extends the brand beyond the street tuning scene.
Hodoor sources Rotiform wheels through verified supplier channels and confirms fitment, finish and delivery before quoting.

We use cookies to keep the site running smoothly. By continuing to browse, you agree to their use. Privacy policy