Vossen Wheels GEN-01 (Monoblock)

Vossen GEN-01 - The Directional Forged Monoblock in Four Catalogue Finishes

Single-Piece Structural Rigidity in the Vossen GEN Collection

Vossen GEN-01 Monoblock is the single-piece directional forged version of the GEN-01 design. Machined from a single forged aluminum alloy billet, the monoblock format delivers face and barrel as one integral unit with no bolts, no welds and no seams. The directional spoke geometry - the defining feature of the GEN collection - follows a consistent rotational arc from hub to rim, and is produced in separate left-hand and right-hand configurations to maintain the correct directional sweep on both sides of the vehicle.

GEN Collection Monoblock: One-Piece Forging for Performance and Consistency

The GEN designation covers Vossen's directional forged range. In monoblock form, the GEN-01 offers several advantages over the three-piece variant: lower overall weight at a given size due to the elimination of hardware and barrel ring mass; higher torsional stiffness since the face and barrel are a continuous structure; and a cleaner aesthetic with no visible bolted seam between face and barrel. The monoblock format is the natural choice for performance-oriented builds where weight and rigidity matter.

Vossen GEN-01 Monoblock Design and Engineering: Directional Multi-Spoke Architecture

The spoke layout of the GEN-01 Monoblock follows a directional multi-spoke pattern, with each spoke tapering as it extends outward from the hub toward the rim. The forged monoblock process compresses the grain structure of the aluminum alloy, creating a wheel that is stronger and lighter than an equivalent cast wheel at the same dimensions. Available in diameters from 19 to 26 inches and widths from 8.5 to 12 inches.

Vossen GEN-01 Monoblock Technical Specifications

Construction: Forged monoblock. Material: Forged aluminum alloy. Diameter: 19 to 26 inches. Width: 8.5 to 12 inches. Offset: custom specified per order. Available finishes: Bronzino, Miami White, Satin Bronze, Gloss Clear. Directional design: left-hand and right-hand configurations supplied as a set.

Vossen GEN-01 Monoblock Available Finishes

Four catalogue finishes are offered: Bronzino applies a warm bronze-gold tone to the forged face; Miami White delivers a clean, bright white that reads crisply against any vehicle colour; Satin Bronze provides a more subdued metallic bronze with a lower-sheen surface; Gloss Clear allows the natural brushed texture of the forged aluminum to show through a high-gloss protective lacquer. Further custom finishes from the Vossen catalogue are available on request through Hodoor Wheels.

Vossen GEN-01 Monoblock Vehicle Fitment: Range Rover, Rolls-Royce Cullinan and Bentley Bentayga

The GEN-01 Monoblock is sized for high-end luxury SUV applications: Range Rover Sport SVR and Range Rover Autobiography in 22- to 24-inch diameters, Rolls-Royce Cullinan and Bentley Bentayga in 22 to 26 inches, and similarly positioned vehicles where directional forged wheels are specified. The monoblock structure keeps rotating mass below equivalent three-piece alternatives at the same size.

Any Vehicle, Any Specification

The GEN-01 Monoblock is built to order for any vehicle. Hodoor Wheels supplies Vossen forged wheels globally and can confirm diameter, width, offset and finish for every fitment. Contact us or buy directly at Hodoor Wheels.