Vossen Wheels S17-11

Vossen S17-11 - Multi-Spoke Concave Forged Monoblock from Series 17

Vossen S17-11 is a forged monoblock wheel from the Series 17 programme featuring a multi-spoke face with a pronounced concave profile. Machined at Vossen's Miami facility from aerospace-grade forged aluminum billet, the S17-11 applies a high spoke count to a deep concave architecture, creating a wheel face that amplifies visual depth as width increases. It is available from 19 to 26 inches across luxury, performance, and track-focused platforms.

Vossen S17-11 - Concave Face Architecture

The concave geometry of the S17-11 is not an applied effect but a structural feature machined directly into the billet. The spokes slope inward from the rim face toward the hub, with the maximum depth point located approximately two-thirds of the way from the outer edge toward the hub ring. At wider widths this depth becomes more pronounced, producing a dish profile that is visible from the front of the vehicle during both stationary and dynamic viewing. Each spoke is machined with a consistent cross-section throughout, maintaining structural geometry across the full range of available diameters and widths.

Vossen S17-11 - Technical Specifications

Construction: forged monoblock (1-piece). Material: aerospace-grade forged aluminum alloy. Available diameters: 19, 20, 21, 22, 23, 24, 25, and 26 inches. Available widths: 8.5 to 13 inches. Concave profile depth increases with available width. Bolt pattern, offset, and centre bore confirmed per vehicle at the time of order.

Vossen S17-11 - Available Finishes

The S17-11 is available in Gloss Clear, Dark Smoke, and Gloss Black. Dark Smoke is frequently specified for this model because the graduated tint emphasises the concave depth by darkening the recessed spoke areas relative to the exposed spoke tops. Gloss Clear provides maximum light reflection across the concave profile, and Gloss Black delivers strong tonal contrast at all viewing angles including the characteristic dish view.

Vossen S17-11 - Sizing and Vehicle Fitment

The S17-11 has been produced for Porsche 911 Turbo S, Ferrari 296 GTB, Lamborghini Huracan Tecnica, Mercedes-AMG GT R, and BMW M4 CSL. The concave multi-spoke profile suits cars with visible wheel arches and pronounced body surfaces, where the dish depth is readable from multiple viewing angles without requiring wide-body modifications.

Vossen S17-11 - Ordering Through Hodoor Wheels

The S17-11 is available to order through Hodoor Wheels. Concave profile depth is a function of the selected width, and Hodoor Wheels can advise on the combination of diameter and width that produces the desired visual result for a specific vehicle and application before the order is placed.

Vossen Forged - Series 17 Collection

Series 17 includes both shallow and deeply concave spoke designs. The S17-11 represents the concave end of the Series 17 monoblock range, with other models offering flatter or more architecturally complex face geometries. Other Series 17 wheels available through Hodoor Wheels include the S17-12, S17-13, S17-14, S17-15T, S17-16, S17-18, and further options.

Vossen S17-11 - Any Vehicle, Any Specification

Hodoor Wheels supplies the Vossen S17-11 to customers across Europe, the Middle East, and internationally. For concave profile consultation, finish selection, and production lead time, submit an enquiry through this page or contact Hodoor Wheels directly.