3SDM 0.01 SF

3SDM 0.01 SF - The Spin Forged Evolution of the Original

All the character of the iconic 0.01, now with the structural advantage of spin forging.

3SDM 0.01 SF takes the mesh-spoke design that launched the brand and rebuilds it with spin forged construction for enhanced strength and reduced weight. The process applies pressure to the rim barrel of the cast blank while spinning at speed, stretching and aligning the metal's grain structure for superior performance properties. The result is a wheel that shares the visual identity of the 0.01 Cast but performs at a higher level under load.

3SDM 0.01 SF Design and Engineering: Spin Forged Mesh Spoke Construction

The spin forging process used in the 0.01 SF begins with the same cast aluminum blank as the standard 0.01, then applies high-pressure rollers to the rim barrel during rotation. This elongates the grain structure through the barrel wall, increasing tensile strength and fatigue resistance without adding weight. The face retains the same multi-spoke mesh architecture, with every spoke flowing from hub to rim in the same tightly woven pattern that defines the 0.01 design.

3SDM 0.01 SF Technical Specifications

Construction: Spin forged monoblock. Material: Cast aluminum alloy. Available diameters: 18 to 19 inches. Available widths: 8.5 to 9.5 inches. Finish options: Silver Cut, Matt Black. The 0.01 SF is a one-piece spin forged wheel designed for performance applications where weight and strength are priorities.

3SDM 0.01 SF Available Finishes

Silver Cut pairs a machine-cut face with a silver base coat for the classic 3SDM contrast finish, with polished highlights across the spoke tops against the matte base. Matt Black provides a uniform dark finish suited to builds where a stealth or aggressive aesthetic is desired. Both finishes are factory-applied and sealed for durability.

3SDM 0.01 SF Vehicle Fitment: Performance Cars and Daily Drivers

The 3SDM 0.01 SF has been fitted to a wide range of vehicles including the Skoda Octavia VRS MK1 and Toyota GT86. Available in 18 and 19-inch diameters with widths from 8.5 to 9.5 inches, the SF variant is ideally suited to performance cars where structural demands are higher and weight reduction provides measurable benefit.

Any Vehicle, Any Specification

The 3SDM 0.01 SF is available for a broad range of vehicle applications and not just the models listed above. If your build requires the visual character of the 0.01 with the added benefit of spin forged construction, the SF is the natural choice. Contact our fitment specialists for guidance on your specific vehicle and configuration.