Cosmis Racing S1 cast aluminum wheel. 18-inch ultra-concave 6-spoke design with milled spoke edges. 3 finishes for sport compact builds.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Gloss Black with Milled Spokes
Gloss White with Milled Spokes
Hyper Bronze
05 /Especificaciones completas
Cosmis Racing S1 – Cast 6-Spoke Wheel with 32-Degree Maximum Concavity Angle
Deepest Concave Profile in the Cosmis Catalog: Milled-Edge Spokes, Stance-Engineered Geometry
Cosmis Racing S1 was engineered specifically to achieve the steepest concavity angle Cosmis produces in a cast monoblock: 32 degrees measured from the spoke face plane to the outer barrel. No other Cosmis model reaches this degree of bowl depth in an 18-inch cast form. The S1 combines this geometry with machine-milled spoke edges, which expose a polished aluminum surface along each spoke's lateral face, creating a two-tone effect without an additional finish step.
Cosmis Racing S1 Design: Six-Spoke Ultra-Concave Face with Machine-Milled Spoke Edges
The S1's six spokes originate close together at the center hub and diverge rapidly outward, maximizing the angle drop to the outer lip. The machine-milled edges along the spoke sides reflect direct light sharply, creating contrast between the milled strip and the surrounding gloss or bronze painted face. The wheel ships in two widths — 9.5 inches and 10.5 inches — both maintaining the same 32-degree spoke pitch, allowing a staggered rear configuration without changing wheel aesthetics. Only 5x114.3 is offered, keeping the model focused on Japanese platform fitments.
Cosmis Racing S1 Technical Specifications
Construction: Cast monoblock. Material: Cast aluminum alloy. Diameter: 18 inches. Width: 9.5 inches and 10.5 inches. Offset: +15mm. Bolt pattern: 5x114.3 exclusively. Center bore: 73.1mm. Load rating: 2105 lbs per wheel. Weight: 25 lbs per wheel. JWL and VIA certified.
Cosmis Racing S1 Finish Options
Three colorways available: Gloss Black with Milled Spokes, Gloss White with Milled Spokes, and Hyper Bronze.
Cosmis Racing S1 Fitment Guide: Nissan 350Z, Acura RSX, Subaru STi, Mitsubishi Evo X
The S1 targets stance and fitment builds where maximum concavity is the primary visual goal. The 5x114.3 bolt pattern covers Nissan 350Z and 370Z (front or rear), Acura RSX and Integra DC5, Subaru WRX STi (5x114.3-converted platforms), and Mitsubishi Lancer Evolution VIII through X. The 18x10.5 rear produces an aggressive stretched-tire look when paired with an 18x9.5 front. Submit vehicle details for size confirmation.
Any Vehicle, Any Specification
The S1 can be ordered for any vehicle and any specification - not just the models listed above. Contact us with your vehicle make, model, and year for a confirmed fitment and size recommendation.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Cosmis Racing Wheels es una marca americana de llantas diseñada para motorsport, drift y aplicaciones de pista. La identidad central de la marca está definida por un enfoque sin compromisos en el diseño orientado al rendimiento — produciendo llantas flow-formed que priorizan la reducción de peso, la integridad estructural y la precisión de montaje para la comunidad de conducción competitiva. Cosmis Racing se distribuye en América del Norte a través de Turn 14 Distribution, uno de los principales distribuidores mayoristas de piezas de rendimiento, asegurando amplia disponibilidad a través de redes de distribuidores y minoristas en línea a nivel nacional.
Hodoor adquiere las llantas Cosmis Racing Wheels a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad