Llanta sport fluoformada MAT. 18-20 pulgadas, Negro Mate y Gunmetal Mate. 5x112, 5x114.3, 5x120. Spec-E. Tesla/GR Corolla: tuercas OEM.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Negro Mate
Gunmetal Mate (Pedido Especial)
05 /Especificaciones completas
Enkei TUNE - MAT Technology Flow-Formed Wheel Optimised for GR Corolla and GR Platform Fitment
Grain-Structure Optimised Barrel via High-Pressure Spin-Forming for Track and Street Use
Enkei TUNE is a flow-formed monoblock wheel whose manufacturing sequence prioritises material densification above all other production criteria. The MAT process — Enkei's proprietary Manufacturing Advanced Technology — applies precisely controlled thermal conditioning to the aluminium blank before spin-forming, allowing the high-pressure rotating mandrel to reorganise grain boundaries within the alloy matrix rather than merely stretching them. The result is a barrel section whose yield strength per gram of material exceeds conventional casting by a measurable margin. Available in 18 and 19-inch diameters in Matte Black and Matte Gunmetal, the TUNE is sized for the Toyota GR Corolla, Tesla Model 3, and similar high-performance hatchback and electric platforms.
Enkei TUNE Manufacturing Detail: Thermal-Primed MAT Spin-Forming
Standard flow-forming presses a room-temperature blank against a rotating mandrel, achieving some grain elongation but limited recrystallisation. The TUNE's MAT variant pre-heats the blank to a temperature at which the aluminium alloy enters a semi-plastic state, enabling the spin-forming pressure to drive grain alignment deep through the barrel wall thickness rather than only at the surface. Post-forming heat treatment then locks in the recrystallised grain structure, delivering the dense, uniform microstructure that underpins the TUNE's fatigue cycle performance. Each TUNE unit passes Enkei's Spec-E certification, confirming compliance with impact, radial load, and bending fatigue requirements beyond JWL.
Enkei TUNE Technical Specifications
Construction: MAT flow-formed monoblock (thermal-primed). Material: aluminium alloy, grain-structure optimised barrel. Diameters: 18 and 19 inches. Widths: 8 and 8.5 inches. Bolt patterns: 5x100, 5x108, 5x112, 5x114.3, 5x120. Test standard: Spec-E (exceeds JWL). Finishes: Matte Black, Matte Gunmetal.
Enkei TUNE Available Finishes: Matte Black and Matte Gunmetal
Matte Black suits the aerodynamic, high-performance aesthetic of GR Corolla and Tesla builds where visual restraint and functional impression are prioritised. Matte Gunmetal introduces a subtle metallic presence that works across both warm and cool body colour palettes.
The TUNE can be ordered for any vehicle and any specification — not just the GR Corolla and Tesla platforms listed above. Whether your build calls for a 5x100 Subaru fitment or a 5x112 European application, we supply the TUNE to your exact diameter, width, offset, and bolt pattern. Contact us with your vehicle model, intended use, and desired setup for a complete fitment and pricing confirmation.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Enkei es un fabricante japonés de llantas fundado en 1950, establecido como uno de los productores de mayor volumen en la industria mundial de llantas aftermarket y OEM. Con 7.359 empleados, ingresos que superan los ¥206,4 mil millones en el año fiscal 2025, y plantas de fabricación en Japón, India y Estados Unidos, Enkei opera a una escala que pocas marcas de llantas aftermarket pueden igualar. El nombramiento de la empresa como Proveedor Oficial de McLaren F1 para la temporada 2026 subraya la credibilidad técnica que impregna toda su gama de productos — desde piezas fundidas de gran consumo hasta componentes de precisión para el motorsport.
Hodoor adquiere las llantas Enkei a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad