HRE 544C (3-Piece)

HRE 544C (3-Piece) - Three-Piece Modular Precision with Concave Mesh Architecture

Full Component Flexibility in the 544C's Deep-Dish Multi-Piece Format

HRE 544C (3-Piece) is a forged modular wheel combining the concave mesh face geometry of the 544C with the dimensional flexibility of a traditional three-piece assembly. The 544C's inward-angled spoke surface is reproduced identically across both construction types, but the three-piece format introduces separate forged center, inner barrel half, and outer barrel half components that allow a wider range of dimensional and finishing options than the FMR-X barrel permits. It is manufactured in the USA from 6061-T6 forged aluminum alloy for large-format luxury SUVs, GT platforms, and custom-spec vehicles requiring an aggressive deep-dish profile.

HRE 544C (3-Piece) Design and Engineering: Multi-Piece Assembly with Concave Face

The three-piece construction allows the outer barrel depth and lip dimensions to be set independently from the center casting. On the 544C, where the concave face already recesses the spoke surface behind the outer rim plane, the three-piece outer barrel further extends this depth relationship - producing a combination of spoke recess and barrel depth not achievable in a two-piece format. The three visible hardware fasteners at the junction between center and outer barrel half are characteristic of this construction method. Each component is finished separately before assembly, supporting independent center and barrel finishes without the constraints of a bonded unit. Wide-body and aggressively cambered builds benefit most from the three-piece's ability to dial in exact offset and width independently.

HRE 544C (3-Piece) Technical Specifications

Construction: 3-Piece forged modular assembly. Material: Forged aluminum alloy (6061-T6). Diameter range: 18- to 24-inch (18, 19, 20, 21, 22, 23, 24). Outer barrel depth: configurable independently of center casting. SUV load-rated in 20- to 24-inch. Centerlock available. OE TPMS and factory lug hardware compatible. Warranty: Lifetime Limited Structural Warranty and 2-Year Finish Warranty. Made in the USA.

HRE 544C (3-Piece) Available Finishes

The 544C (3-Piece) is available in over 75 standard finishes plus custom colors. Three-piece construction allows center, inner barrel, and outer barrel to each carry a different finish - enabling three-tone configurations that are only possible with full component separation. The concave mesh face pairs particularly well with directional finishes such as Brushed Dark Clear or Brushed Gold on the center, contrasted against a Polished Clear outer barrel. Representative options include Gloss Black, Satin Black, Polished Clear, Brushed Dark Clear, Polished, and Brushed Gold.

HRE 544C (3-Piece) Vehicle Fitment: Audi RS6, Bentley Bentayga, Range Rover SV, BMW X5 M

The 544C (3-Piece) is produced to custom offset, width, and bolt circle for any vehicle. The three-piece concave format is well-suited to large-platform vehicles where both deep barrel visibility and aggressive spoke geometry contribute to the build aesthetic - common applications include Audi RS6 Avant and RS7, Bentley Bentayga Speed, Range Rover SV and Sport SVR, and BMW X5 M Competition and X6 M Competition. The diameter range of 18 to 24 inches spans the full range from compact performance applications to large luxury SUV fitments.

HRE 544C (3-Piece) - Any Vehicle, Any Build Specification

The 544C (3-Piece) can be configured for any vehicle make and model - not just the platforms listed above. HRE produces the 544C (3-Piece) to any diameter, width, offset, bolt pattern, center bore, and finish combination. Provide your vehicle details and our team will confirm the fitment specification and return a complete build quotation.