The Niche Road Wheels TERAMO is a cast aluminum monoblock wheel with a five-spoke compound-concave design, available in Matte Black, Anthracite Brushed Face Tint, and Matte Black w/ DDT Face finishes, offered in 18- to 20-inch diameters.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Matte Black
Anthracite Brushed Face Tint
Matte Black w/ DDT Face
05 /Especificaciones completas
Niche Road Wheels TERAMO - Five-Spoke Compound-Concave Wheel Built for Muscle Cars
Deep Inward Face Geometry in 18 to 20-Inch Diameters for Pony Cars and Wide-Platform Vehicles
The TERAMO brings compound-concave spoke geometry to the Niche Road Wheels cast lineup, targeting muscle car and pony car buyers who want a wheel whose face shape actively reinforces the aggressive stance of wide-platform American performance vehicles. Five broad spokes bow inward from the outer lip toward the hub, pulling the eye through the wheel face in a way that flat-face designs cannot replicate. Offered from 18 to 20 inches, the TERAMO addresses the most common fitment sizes for Mustang, Camaro, Challenger, and Charger builds.
Niche TERAMO Concave Geometry: Structural Spokes with Compound Inward Profile
Compound-concave means each spoke carries a double curvature: the primary inward sweep toward the wheel center is crossed by a secondary lateral curve across the spoke width. This double-curved profile requires tighter control during the casting process but delivers a three-dimensional face appearance that intensifies under raking light and from low angles — the two viewing positions where muscle car wheels get scrutinized most. The wide spoke cross-section maintains the structural load capacity needed for large-displacement, high-torque drivetrains typical of these platforms.
Niche TERAMO Technical Specifications
Production method: Cast. Material: Aluminum alloy. Diameter range: 18 to 20 inches. Width range: 8 to 11 inches.
Niche TERAMO Finishes: Matte Black, Anthracite Brushed Face Tint, Matte Black DDT Face
Matte Black suits blacked-out muscle builds where the wheel should recede into the bodywork. Anthracite Brushed Face Tint places a directional brush pattern across the spoke face under a tinted anthracite coating, adding tactile depth to the concave surface. Matte Black w/ DDT Face pairs a matte barrel with a double-dark-tinted face for a stealth two-tone contrast that reads as a subtle separation between barrel and spoke rather than a dramatic color shift.
Niche TERAMO Platform Compatibility: Ford Mustang, Chevrolet Camaro, Dodge Challenger, Dodge Charger
Eighteen to twenty-inch availability covers the standard rim sizing across Ford Mustang GT, Chevrolet Camaro SS, Dodge Challenger R/T, and Dodge Charger R/T builds. Volkswagen Golf and compact performance sedans requiring an 18" or 19" fitment are equally supported. Submit your vehicle details for a full torque spec, offset, and bolt-circle confirmation.
Any Vehicle, Any Specification
The TERAMO can be ordered for any vehicle and any specification - not just the models listed above. Contact us with your vehicle make, model, and year for a confirmed fitment specification.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Niche Road Wheels es una marca americana de llantas operada por MHT Wheels, un fabricante californiano fundado en 1994 que ha construido uno de los portafolios de llantas más amplios en el aftermarket norteamericano. La marca Niche está posicionada como la expresión orientada al diseño de la capacidad de fabricación de MHT — combinando ingeniería de grado automotriz con diseño visual impactante en una gama que cubre automóviles de pasajeros, camionetas y SUV. Con un catálogo que se extiende a 60 a 80 modelos activos, Niche ofrece una de las selecciones más amplias de estilos de llantas aftermarket disponibles de una sola marca.
Hodoor adquiere las llantas Niche Road Wheels a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad