Vossen Wheels LCX-04

Vossen LCX-04 - Forged Monoblock Built for Maximum Concavity

Float-Spoke Architecture in the Vossen LCX Series

Vossen LCX-04 is a forged monoblock from the Vossen LCX Series, built around a float-spoke design philosophy: eight primary spokes that suspend above the concave dish, keeping the face open while the deep bowl between spoke bases and barrel defines the wheel's visual character. Sized from 20 to 26 inches in widths from 9 to 14 inches, the LCX-04 targets high-clearance performance SUVs and exotic supercars running large-diameter, wide fitments that demand structural depth alongside visual impact.

Vossen LCX-04 Design and Engineering: Float-Spoke Identity

The LCX-04 is the deep-concave statement model in the LCX lineup. LCX-01 and LCX-02 use higher-spoke-count structures built for a uniform, symmetrical face read. LCX-03 carries sharper angular geometry with a flatter face plane. The LCX-04 departs entirely from these: the eight float spokes are machined so their inner edges lift off the face plane, revealing a shadow channel between each spoke base and the barrel entry. At 20 inches this produces a controlled graphic contrast; at 24 or 26 inches the float-spoke geometry frames an aggressive bowl that registers from distance. This is the LCX variant selected for wide-body builds on Lamborghini Urus, Range Rover Sport SVR, and Porsche Cayenne Turbo S - platforms where arch dimensions allow the full 12- to 14-inch width to exploit the concave depth - as well as supercar applications where a large-diameter rear fits through the low-slung arch opening.

Vossen LCX-04 Technical Specifications

Construction: Forged monoblock. Material: 6061-T6 forged aluminium alloy. Spoke count: 8 floated primary spokes. Concave profile: machined progressively - deeper bowl at 12 and 14-inch widths, moderate dish at 9 to 11 inches - so the proportional relationship between spoke face and dish remains consistent across the full width range. Diameters: 20 to 26 inches. Widths: 9 to 14 inches. Offset: negative and low-positive custom offsets available for wide-arch fitment on lifted and air-suspension platforms. Bolt pattern and centre bore: hub-centric, machined to order per vehicle application across all standard and custom PCDs. Standard finishes: Gloss Clear, Gloss Black, Satin Black.

Vossen LCX-04 Available Finishes

Standard finishes for the LCX-04 are Gloss Clear, Gloss Black, and Satin Black - chosen to let the concave dish geometry define the visual statement without surface treatment competing with the form. Gloss Clear over bare forged aluminium exposes the spoke base relief and dish transition. Gloss Black deepens the bowl shadow. All 48 finishes from Vossen's custom colour library are available to order, including brushed, polished, and dual-tone programmes where the centre face and outer dish carry independent treatments.

Vossen LCX-04 Vehicle Fitment: Performance SUVs and Exotic Supercars

The LCX-04 covers the large-format fitment territory in the LCX series. Typical platform sizing: Lamborghini Urus and BMW X5 M Competition in 22- to 23-inch at 10.5- to 12-inch width; Porsche Cayenne Turbo S and Range Rover Sport SVR in 22- to 23-inch at 10.5-inch width; supercar applications - Ferrari SF90 Stradale, McLaren 720S, Lamborghini Huracan - in 21- to 22-inch rear at 9- to 10.5-inch width where arch clearance and brake caliper offset allow the float-spoke face to read through the opening. Provide your vehicle make, model, year, arch clearance, and stance target: we will confirm the correct LCX-04 diameter, width, and offset before any order is placed.

Vossen LCX-04 - Sizing the Deep-Concave LCX for Your Platform

The LCX-04's 20- to 26-inch diameter range and 9- to 14-inch width programme span every large-format fitment: from a 21x9.5 front on a McLaren to a 26x14 on a heavily modified Escalade build. Negative-offset machining opens the float-spoke bowl toward the observer on wide-arch fitments; positive offset pulls the face inward for conservative clearance. Tell us your vehicle, target diameter and width, and brake caliper make and diameter - we return a confirmed LCX-04 offset, PCD, and centre bore specification with no obligation to order.