3SDM 0.09

3SDM 0.09 - The Vintage-Inspired Cast Wheel with Mirror Polished Lip

80s-Influenced Multi-Spoke Design with Two-Step Rim and Machined Centre Cap

The 3SDM 0.09 is a cast monoblock wheel that takes deliberate design cues from wheel aesthetics of the 1980s while applying a contemporary production standard to those forms. The design avoids direct copying of historical references, instead distilling the defining elements — multi-spoke layout, spoke length, and rim profile — into a unified design that sits comfortably alongside modern lowered and lightly modified vehicles. Available in 18- and 19-inch diameters across widths from 8.5 to 10 inches.

3SDM 0.09 Design: Two-Step Rim, Recessed Bowl, and Mirror Lip

The defining visual elements of the 0.09 are its two-step rim profile and the machined mirror polished lip running the full circumference. The two-step design creates a visual platform that maximises apparent spoke length, reinforcing the elegant, stretched appearance typical of the 80s wheels that inspired the design. The wheel centre uses a recessed bowl with a forged aluminium cap machined with the 3SDM logo. The face of each spoke carries a machined 3SDM logo detail. Available in Matt Silver with Matt Machine Lip, Matt Black with Matt Machine Lip, and Gloss Gold with Gloss Machined Lip.

3SDM 0.09 Technical Specifications

Construction: Cast monoblock. Material: Cast aluminum alloy. Available in 18-inch (8.5- and 9.5-inch width) and 19-inch (8.5- and 10-inch width) diameters. PCD options include 5x100, 5x112, 5x114.3, and 5x120. Load rating: 690kg (18-inch), 760kg (19-inch). The cast construction makes the 0.09 accessible as an entry-level option for the design, while the 0.09 SF variant offers a spin forged alternative for buyers prioritising lower weight and higher structural rating.

3SDM 0.09 Finishes: Matt Silver Mirror Lip, Matt Black Mirror Lip, Gold Mirror Lip

Matt Silver Mirror Lip: a matt silver painted face and spoke surfaces with a polished mirror lip around the rim perimeter. Matt Black Mirror Lip: same profile in a dark matt finish with the contrasting bright lip. Gloss Gold Mirror Lip: a warm gold painted finish with a gloss machined lip for a more striking, two-tone appearance. All three finishes are available across both 18- and 19-inch diameters, with specific size availability depending on PCD combination in stock.

3SDM 0.09 Cast Fitment Applications

The 18-inch sizing in 8.5-inch width covers common fitments for Volkswagen Golf, Audi A3 and S3, Honda Civic, BMW 1 and 2 Series, and similar compact performance platforms. The 9.5-inch 18-inch width opens the design to slightly wider setups. The 19-inch options in 8.5 and 10-inch widths target BMW 3 Series, Audi A4 and S4, and other mid-size platforms running 5x112 and 5x120 bolt patterns. The 10-inch 19-inch width suits rear axles of rear-wheel-drive platforms for a mild stagger.

3SDM 0.09 Cast vs. 3SDM 0.09 SF

The 0.09 Cast and the 0.09 SF share the same design, finish options, and visual specification. The cast version offers a wider range of diameters and widths, with availability in both 18- and 19-inch sizes across multiple widths. The spin forged 0.09 SF is limited to 18x8.5 but delivers a higher load rating of 875kg versus the cast's 690kg, and benefits from the reduced weight and enhanced barrel grain structure of the flow-formed process. Both are single-piece monoblock constructions.

Ordering and Availability

The 3SDM 0.09 is available in multiple offset options across its PCD range. Stock levels vary by size and finish; the Silver Mirror Lip option in 5x114.3 and 5x112 tends to have the widest availability. The 0.09 can be ordered to suit the full range of supported vehicles and can be specified for applications not just the models listed above — buyers with unusual or non-standard fitment requirements should consult a 3SDM authorised retailer for guidance.