Forged enduro line 10-spoke wheel with 2100 lb load rating and capless hub design for BMW, Chevrolet, and Porsche platforms. Available in 18–19" diameters.
Finitions
Prix complet, vérification du montage et estimation de livraison sous 24 h.
03 /Spécifications
Cette jante existe en plusieurs montages. La taille finale, l'ET et l'entraxe sont à confirmer avec notre conseiller.
Besoin des cotes exactes pour votre voiture ?
Nous joindrons le montage confirmé, la fiche technique complète et la documentation disponible à votre devis.

04 /Finition
Chaque finition est appliquée à la main et contrôlée avant expédition. Les finitions sur mesure ajoutent 2 semaines au délai.
Anthracite
Race Silver
Satin Black
05 /Spécifications complètes
Apex Wheels SM-10RE — Enduro Line Ten-Spoke Forged Wheel with 2100 lb Load Rating
Maximum-Strength Ten-Spoke Enduro: Competition-Grade Resilience for BMW, Chevy, and Porsche Heavy Builds
The Apex SM-10RE is a ten-spoke, forged monoblock wheel from the Apex Enduro Line, delivering the highest structural rating in the Apex SM series. Its 2100 lb per-corner load rating is 500 lbs above the SM-10RS Sprint Line specification, making the SM-10RE the appropriate choice for chassis where total vehicle weight, additional ballast, or sustained high-speed loading pushes beyond what Sprint Line structural ratings accommodate. The SM-10RE was developed for BMW M5 Comp, Chevrolet Corvette C8 Z06, and Porsche 911 GT3 RS in race-weight or heavily modified configurations where sprint-line load limits are approached under sustained circuit use.
SM-10RE Manufacture: Enduro-Specification Forging and Section Geometry
The SM-10RE is forged from 6061-T6 billet under Apex's standard 10,000-ton closed-die process, but the section geometry specification differs from the SM-10RS: spoke widths and barrel wall thickness are increased at the structural-critical zones to meet the 2100 lb requirement under JWL and VIA test protocol at the heaviest platforms the SM-10RE is rated for. The ten spokes are CNC-machined after T6 heat treatment to maintain the SM series' characteristic straight-radial spoke profile — each spoke narrowing uniformly from a wider hub base to a narrower rim tip — while adding the dimensional allowance that the higher load spec requires. The SM-10RE is therefore marginally heavier than the SM-10RS at equivalent size, a trade Apex accepts as inherent to the Enduro Line's structural mission.
SM-10RE Sizing and Platform Data
Offered in 19-inch, 20-inch, and 21-inch diameters with five-lug and six-lug bolt circles. The six-lug option targets Chevrolet bolt patterns; five-lug covers BMW and Porsche hub specifications. Apex publishes confirmed fitment data for BMW M5 Comp (G30/G60), Corvette C8 Stingray and Z06, and Porsche 911 GT3 RS brake clearance on all three diameters. The 21-inch option extends SM-10RE reach into larger-diameter luxury performance SUV applications.
SM-10RE Finishes
Matte Black, Satin Gunmetal, and Brushed Titanium. The brushed titanium finish is unique to the SM-10RE within the Enduro Line — applied to the machined spoke surfaces with a titanium-tinted base coat that shifts colour between warm and cool light conditions, producing a finish character that differs from both the VS-5RE's brushed silver and the SM-10RS's anthracite options.
SM-10RE in the Enduro Line
The SM-10RE and VS-5RE constitute the current Enduro Line. The SM-10RE uses ten spokes for a denser face appearance; the VS-5RE uses five spokes for a more open face at the same 2100 lb rating. For the SM-10 spoke geometry at Sprint Line loads, the SM-10RS is the lighter, sprint-focused alternative.
SM-10RE Technical Summary
Ten-spoke forged monoblock. 6061-T6 aluminium. 2100 lb per-corner load rating. 19, 20, 21-inch diameters. Five- and six-lug bolt circles. Matte Black, Satin Gunmetal, Brushed Titanium. Published per-size weights.
Any Vehicle, Any Specification
The SM-10RE is available for BMW, Chevrolet, and Porsche configurations requiring the Enduro Line load rating. Contact Apex Wheels or an authorised distributor to confirm diameter, bolt pattern, offset, and finish availability for the SM-10RE on your specific vehicle.
06 /Certification
Les documents varient selon le modèle et le pays. Nous les vérifions pour votre jante avant le paiement et vous disons d'emblée ce qui est disponible.
01
Vous savez ce que vous recevez
Chaque devis précise exactement ce que vous recevez : marque, modèle, finition et documents.
02
Documents vérifiés avant paiement
Nous confirmons quels certificats (TÜV, JWL, VIA) existent pour votre modèle et les joignons au devis.
03
Montage vérifié
Déport, entraxe et dégagement des freins vérifiés pour votre voiture.
04
Immatriculation dans votre pays
Indiquez-nous où la voiture est immatriculée : nous vérifierons ce qui est requis et ce que nous pouvons fournir.

Besoin de documentation pour votre jante ?

Apex Wheels, exploitée par Aftermarket Performance Express Inc. et basée à Pleasanton, Californie, a été fondée avec une mission spécifique : concevoir des jantes légères et adaptées à la piste, optimisées pour les plateformes BMW et les véhicules de performance européens. Cette orientation a façonné chaque aspect du développement produit de la marque, de la géométrie des rayons conçue pour dégager les étriers de frein spécifiques aux BMW série M et sport, aux profils de déport qui comblent les jeux d'aile sur les véhicules européens abaissés sans nécessiter d'entretoises. Le résultat est une marque de jantes que la communauté des plateformes européennes choisit non comme un compromis, mais comme une solution conçue sur mesure.
Hodoor s'approvisionne en jantes Apex Wheels auprès de fournisseurs vérifiés et confirme la compatibilité, la finition et les options de livraison avant d'établir un devis.

Nous utilisons des cookies pour assurer le bon fonctionnement du site. En poursuivant votre navigation, vous acceptez leur utilisation. Politique de confidentialité