The BBS CH is a flow-formed split-spoke wheel with a motorsport-derived design and a replaceable stainless-steel rim protector. Back-milled spokes, counter-pressure cast, weight-optimised by FEM analysis. Original BBS design. Available at Hodoor Wheels.
Finitions
Prix complet, vérification du montage et estimation de livraison sous 24 h.
03 /Spécifications
Cette jante existe en plusieurs montages. La taille finale, l'ET et l'entraxe sont à confirmer avec notre conseiller.
Besoin des cotes exactes pour votre voiture ?
Nous joindrons le montage confirmé, la fiche technique complète et la documentation disponible à votre devis.

04 /Finition
Chaque finition est appliquée à la main et contrôlée avant expédition. Les finitions sur mesure ajoutent 2 semaines au délai.
Noir satiné
Noir brillant
Gunmetal mat
Gunmetal brillant
Argent satiné
Bronze satiné
Anthracite
05 /Spécifications complètes
The Original Split-Spoke Design
Some wheels follow a trend. The BBS CH set one. Its split-spoke geometry - long, angled spokes that create a sense of motion even when the car is stationary - became a reference point for an entire generation of performance wheels. The design is clean, purposeful, and instantly recognisable, which is why it remains one of the most requested shapes in the BBS catalogue.
Where Flow-Forming Meets Counter-Pressure Casting
The CH is produced using BBS's counter-pressure casting process, followed by flow-forming of the rim area. This is the same technology the brand introduced to the aftermarket in 1996 and has refined over decades of motorsport and OEM supply. During flow-forming, the cast blank is heated and rolled under high pressure, compacting the material and aligning its grain structure. This increases strength and stiffness while reducing weight, and it allows the CH to achieve a stiffness-to-weight ratio that a conventional cast wheel cannot approach. The wheel is also weight-optimised through FEM analysis, ensuring that material is placed where it is needed and removed where it is not. BBS develops this geometry in-house, and no replica producer has access to the tooling or the thermal treatment process.
The CH Design
The CH's defining feature is its long, angled split-spoke pattern - a design that has become a reference point for enthusiasts because it looks equally correct on a Volkswagen Golf R and a Porsche Cayenne. The spokes are back-milled to remove unnecessary material, and the wheel includes a replaceable stainless-steel rim protector - a detail that protects the rim edge from kerb damage. The face is visually dynamic, but the flow-formed barrel ensures that the density does not come at the cost of performance. It is a wheel that reads as motorsport-derived without looking overstated.
For Cars That Demand Proven Engineering
The BBS CH suits owners of Volkswagen Golf R, Audi S4, and Porsche Cayenne - cars where the wheel must perform under load and look correct at every viewing distance. Tell us which car you are building for, and we will confirm the CH specification before the order is signed off.
BBS CH - Any Vehicle, Any Specification
BBS CH is available in diameters from 17- to 20-inch and widths from 7.5 to 9.5 inches, covering a broad range of platforms from hot hatches to full-size SUVs. The CH is particularly suited to Volkswagen Golf R, Audi S4, Porsche Cayenne, and BMW 3 Series builds where the motorsport-derived split-spoke geometry reads as both technically correct and visually dynamic. The replaceable stainless-steel rim protector makes the CH a practical daily-driver choice as well as a weekend performance option. Custom offsets and a full range of PCD configurations are available through our fitment consultation programme. Contact Hodoor Wheels for a fitment consultation and pricing.
06 /Certification
Les documents varient selon le modèle et le pays. Nous les vérifions pour votre jante avant le paiement et vous disons d'emblée ce qui est disponible.
01
Vous savez ce que vous recevez
Chaque devis précise exactement ce que vous recevez : marque, modèle, finition et documents.
02
Documents vérifiés avant paiement
Nous confirmons quels certificats (TÜV, JWL, VIA) existent pour votre modèle et les joignons au devis.
03
Montage vérifié
Déport, entraxe et dégagement des freins vérifiés pour votre voiture.
04
Immatriculation dans votre pays
Indiquez-nous où la voiture est immatriculée : nous vérifierons ce qui est requis et ce que nous pouvons fournir.

Besoin de documentation pour votre jante ?

BBS est le pionnier historique de la jante de performance — fondée en 1970 à Schiltach, en Allemagne, avec BBS Japon fondée en 1983. La marque a bâti sa réputation sur une conviction unique : l’ingénierie issue du sport automobile doit parvenir à la route, et non rester confinée au paddock. Cette conviction s’incarne le plus clairement dans la technologie BBS Flow Forming — le procédé qui définit la Performance Line de la marque et transpose une ingénierie dérivée de la course sur un large éventail de véhicules de luxe et de performance.
Hodoor s'approvisionne en jantes BBS auprès de fournisseurs vérifiés et confirme la compatibilité, la finition et les options de livraison avant d'établir un devis.

Nous utilisons des cookies pour assurer le bon fonctionnement du site. En poursuivant votre navigation, vous acceptez leur utilisation. Politique de confidentialité