The BBS FI-R is a flow-formed monoblock wheel with five split spokes and motorsport-derived weight-saving holes. Back-milled spokes, 6000-series aluminium, weight from 7.7 kg. Original BBS design. Available at Hodoor Wheels.
Finitions
Prix complet, vérification du montage et estimation de livraison sous 24 h.
03 /Spécifications
Cette jante existe en plusieurs montages. La taille finale, l'ET et l'entraxe sont à confirmer avec notre conseiller.
Besoin des cotes exactes pour votre voiture ?
Nous joindrons le montage confirmé, la fiche technique complète et la documentation disponible à votre devis.

04 /Finition
Chaque finition est appliquée à la main et contrôlée avant expédition. Les finitions sur mesure ajoutent 2 semaines au délai.
Noir satiné
Noir brillant
Gunmetal mat
Gunmetal brillant
Argent satiné
Bronze satiné
Anthracite
05 /Spécifications complètes
BBS FI-R - The Flow-Formed Monoblock With Motorsport-Derived Split Spokes
The Wheel That Motorsport Built for the Road
Some wheels are designed for a single platform. The BBS FI-R was designed for a purpose - to bring motorsport-derived engineering to road-going performance cars. Its five split spokes are not a stylistic choice; they are a direct reference to the wheels BBS developed for racing, where reducing unsprung mass and maintaining brake cooling are the only metrics that matter. The FI-R is the road-going expression of that idea, and it has become a reference point for Porsche owners because of it.
Where Flow-Forming Meets Motorsport Heritage
The FI-R sits within the BBS Forged Line - the brand's flagship platform, produced at BBS Japan using a multi-stage flow-forming process. Each wheel begins as a billet of 6000-series aerospace-grade aluminium, which is heated and flow-formed under extreme pressure to create a dense, fine-grained metal structure. The FI-R is then back-milled to remove material from the spokes that is not required for strength, reducing weight without compromising structural integrity. The result is a one-piece wheel that weighs as little as 7.7 kg in its lightest configuration, yet delivers the stiffness-to-weight ratio that a performance car demands. BBS develops this geometry in-house, and no replica producer has access to the tooling or the thermal treatment process.
The FI-R Design
The FI-R's defining feature is its five split-spoke pattern - a design that has become instantly recognisable because it looks equally correct on a Porsche 911 GT3 and a BMW M4. Each spoke features a hole at its outer edge to reduce weight further, a detail that is visible on close inspection and that reflects the FI-R's motorsport origins. The design is deliberately aggressive without being overstated, and it reads as purposeful from every angle. It is a wheel that suits performance cars where the wheel is expected to make a statement - a Porsche 911, a BMW M4, or an Audi R8.
For Performance Cars That Demand Motorsport-Derived Engineering
The BBS FI-R suits owners of Porsche 911 (991/992), BMW M4 (F82/G82), and Audi R8 - cars where the wheel must perform under load and look correct at every viewing distance. Tell us which car you are building for, and we will confirm the FI-R specification before the order is signed off.
BBS FI-R - Any Vehicle, Any Specification
BBS FI-R is available in diameters from 19- to 21-inch and widths from 8.5 to 12.5 inches, with fitment programs covering Porsche 911 (991/992 Carrera, GT3, Turbo), BMW M4 (F82/G82), and Audi R8 (4S). The extended width range supports staggered setups and wide-body builds, while the custom offset program accommodates GT3-specification track configurations. Every specification is validated against the platform before production begins. Contact Hodoor Wheels for a fitment consultation and pricing.
06 /Certification
Les documents varient selon le modèle et le pays. Nous les vérifions pour votre jante avant le paiement et vous disons d'emblée ce qui est disponible.
01
Vous savez ce que vous recevez
Chaque devis précise exactement ce que vous recevez : marque, modèle, finition et documents.
02
Documents vérifiés avant paiement
Nous confirmons quels certificats (TÜV, JWL, VIA) existent pour votre modèle et les joignons au devis.
03
Montage vérifié
Déport, entraxe et dégagement des freins vérifiés pour votre voiture.
04
Immatriculation dans votre pays
Indiquez-nous où la voiture est immatriculée : nous vérifierons ce qui est requis et ce que nous pouvons fournir.

Besoin de documentation pour votre jante ?

BBS est le pionnier historique de la jante de performance — fondée en 1970 à Schiltach, en Allemagne, avec BBS Japon fondée en 1983. La marque a bâti sa réputation sur une conviction unique : l’ingénierie issue du sport automobile doit parvenir à la route, et non rester confinée au paddock. Cette conviction s’incarne le plus clairement dans la technologie BBS Flow Forming — le procédé qui définit la Performance Line de la marque et transpose une ingénierie dérivée de la course sur un large éventail de véhicules de luxe et de performance.
Hodoor s'approvisionne en jantes BBS auprès de fournisseurs vérifiés et confirme la compatibilité, la finition et les options de livraison avant d'établir un devis.

Nous utilisons des cookies pour assurer le bon fonctionnement du site. En poursuivant votre navigation, vous acceptez leur utilisation. Politique de confidentialité