The BBS LM is a flow-formed two-piece wheel inspired by the 24 Hours of Le Mans. Its cross-spoke mesh design and diamond-cut rim have defined the genre since 1994. Made in Japan with exposed stainless hardware. Original BBS design. Available at Hodoor Wheels.
Finitions
Prix complet, vérification du montage et estimation de livraison sous 24 h.
03 /Spécifications
Cette jante existe en plusieurs montages. La taille finale, l'ET et l'entraxe sont à confirmer avec notre conseiller.
Besoin des cotes exactes pour votre voiture ?
Nous joindrons le montage confirmé, la fiche technique complète et la documentation disponible à votre devis.

04 /Finition
Chaque finition est appliquée à la main et contrôlée avant expédition. Les finitions sur mesure ajoutent 2 semaines au délai.
Noir satiné
Noir brillant
Gunmetal mat
Gunmetal brillant
Argent satiné
Bronze satiné
Anthracite
05 /Spécifications complètes
BBS LM - The Flow-Formed Two-Piece Wheel Inspired by Le Mans
The Design That Defined a Genre
Some wheels are designed to follow trends. The BBS LM was designed to set one. First introduced in 1994 and named after the 24 Hours of Le Mans - the endurance race where BBS racing wheels won for decades - the LM is the wheel that defined what a two-piece mesh design should look like. Its cross-spoke face and diamond-cut rim have become a reference point for enthusiasts around the world, and the design has remained in continuous production for over thirty years because it was resolved correctly the first time.
Where Flow-Forming Meets Two-Piece Construction
The LM is produced by BBS Japan using a combination of technologies that reflects the brand's motorsport heritage. The centre face begins as a high-quality aluminium blank, which is heated and flow-formed under extreme pressure to create a dense, fine-grained metal structure. The outer rim is flow-formed separately, allowing BBS to achieve a rim well thickness of just 2.25 mm - significantly thinner and lighter than a conventional casting. The two components are then joined using exposed stainless hardware, a construction that allows for precise assembly and, uniquely for this category, the ability to replace the outer rim if it is damaged. This is a wheel built to be serviced, not simply replaced.
Why Flow-Forming Matters on the LM
Flow-forming is not a marketing term - it is a metallurgical process. By spinning the aluminium blank against hydraulic rollers at high temperature, BBS compacts the material and aligns its grain structure, producing a wheel that is both lighter and stronger than a conventional cast alternative. On the LM, this translates into a measurable reduction in unsprung mass - approximately 20% compared to a traditional cast alloy wheel of similar dimensions. The result is sharper turn-in, quicker acceleration, and improved braking response. The LM's two-piece construction also allows for a wider range of offsets and lip depths than a one-piece design, which is why it remains a favourite for everything from Porsche 911s to JDM legends.
For Drivers Who Value Proven Design
The BBS LM suits owners of Porsche 911, BMW M3, and Nissan Skyline GT-R - cars where the wheel must be both visually correct and technically capable. Every specification is validated against the individual vehicle before production begins. Reach us to begin your fitment review.
BBS LM - Any Vehicle, Any Specification
BBS LM is available in diameters from 17 to 21 inches and widths from 7 to 12 inches - a range that reflects the flexibility of its two-piece construction. The LM's separate centre and rim allow BBS to achieve offset and lip depth combinations that are impossible in a one-piece design, making it the preferred choice for Porsche 911 (964/993/996/997/991), BMW M3 (E30/E36/E46/E92), and Nissan Skyline GT-R builds where precise stance is critical. Contact Hodoor Wheels for a fitment consultation and pricing.
06 /Certification
Les documents varient selon le modèle et le pays. Nous les vérifions pour votre jante avant le paiement et vous disons d'emblée ce qui est disponible.
01
Vous savez ce que vous recevez
Chaque devis précise exactement ce que vous recevez : marque, modèle, finition et documents.
02
Documents vérifiés avant paiement
Nous confirmons quels certificats (TÜV, JWL, VIA) existent pour votre modèle et les joignons au devis.
03
Montage vérifié
Déport, entraxe et dégagement des freins vérifiés pour votre voiture.
04
Immatriculation dans votre pays
Indiquez-nous où la voiture est immatriculée : nous vérifierons ce qui est requis et ce que nous pouvons fournir.

Besoin de documentation pour votre jante ?

BBS est le pionnier historique de la jante de performance — fondée en 1970 à Schiltach, en Allemagne, avec BBS Japon fondée en 1983. La marque a bâti sa réputation sur une conviction unique : l’ingénierie issue du sport automobile doit parvenir à la route, et non rester confinée au paddock. Cette conviction s’incarne le plus clairement dans la technologie BBS Flow Forming — le procédé qui définit la Performance Line de la marque et transpose une ingénierie dérivée de la course sur un large éventail de véhicules de luxe et de performance.
Hodoor s'approvisionne en jantes BBS auprès de fournisseurs vérifiés et confirme la compatibilité, la finition et les options de livraison avant d'établir un devis.

Nous utilisons des cookies pour assurer le bon fonctionnement du site. En poursuivant votre navigation, vous acceptez leur utilisation. Politique de confidentialité