Jante sport flow-formée MAT. 18-20 pouces, Noir Mat et Gunmetal Mat. 5x112, 5x114.3, 5x120. Spec-E. Tesla/GR Corolla : écrous OEM.
Finitions
Prix complet, vérification du montage et estimation de livraison sous 24 h.
03 /Spécifications
Cette jante existe en plusieurs montages. La taille finale, l'ET et l'entraxe sont à confirmer avec notre conseiller.
Besoin des cotes exactes pour votre voiture ?
Nous joindrons le montage confirmé, la fiche technique complète et la documentation disponible à votre devis.

04 /Finition
Chaque finition est appliquée à la main et contrôlée avant expédition. Les finitions sur mesure ajoutent 2 semaines au délai.
Noir Mat
Gunmetal Mat (Commande Spéciale)
05 /Spécifications complètes
Enkei TUNE - MAT Technology Flow-Formed Wheel Optimised for GR Corolla and GR Platform Fitment
Grain-Structure Optimised Barrel via High-Pressure Spin-Forming for Track and Street Use
Enkei TUNE is a flow-formed monoblock wheel whose manufacturing sequence prioritises material densification above all other production criteria. The MAT process — Enkei's proprietary Manufacturing Advanced Technology — applies precisely controlled thermal conditioning to the aluminium blank before spin-forming, allowing the high-pressure rotating mandrel to reorganise grain boundaries within the alloy matrix rather than merely stretching them. The result is a barrel section whose yield strength per gram of material exceeds conventional casting by a measurable margin. Available in 18 and 19-inch diameters in Matte Black and Matte Gunmetal, the TUNE is sized for the Toyota GR Corolla, Tesla Model 3, and similar high-performance hatchback and electric platforms.
Enkei TUNE Manufacturing Detail: Thermal-Primed MAT Spin-Forming
Standard flow-forming presses a room-temperature blank against a rotating mandrel, achieving some grain elongation but limited recrystallisation. The TUNE's MAT variant pre-heats the blank to a temperature at which the aluminium alloy enters a semi-plastic state, enabling the spin-forming pressure to drive grain alignment deep through the barrel wall thickness rather than only at the surface. Post-forming heat treatment then locks in the recrystallised grain structure, delivering the dense, uniform microstructure that underpins the TUNE's fatigue cycle performance. Each TUNE unit passes Enkei's Spec-E certification, confirming compliance with impact, radial load, and bending fatigue requirements beyond JWL.
Enkei TUNE Technical Specifications
Construction: MAT flow-formed monoblock (thermal-primed). Material: aluminium alloy, grain-structure optimised barrel. Diameters: 18 and 19 inches. Widths: 8 and 8.5 inches. Bolt patterns: 5x100, 5x108, 5x112, 5x114.3, 5x120. Test standard: Spec-E (exceeds JWL). Finishes: Matte Black, Matte Gunmetal.
Enkei TUNE Available Finishes: Matte Black and Matte Gunmetal
Matte Black suits the aerodynamic, high-performance aesthetic of GR Corolla and Tesla builds where visual restraint and functional impression are prioritised. Matte Gunmetal introduces a subtle metallic presence that works across both warm and cool body colour palettes.
The TUNE can be ordered for any vehicle and any specification — not just the GR Corolla and Tesla platforms listed above. Whether your build calls for a 5x100 Subaru fitment or a 5x112 European application, we supply the TUNE to your exact diameter, width, offset, and bolt pattern. Contact us with your vehicle model, intended use, and desired setup for a complete fitment and pricing confirmation.
06 /Certification
Les documents varient selon le modèle et le pays. Nous les vérifions pour votre jante avant le paiement et vous disons d'emblée ce qui est disponible.
01
Vous savez ce que vous recevez
Chaque devis précise exactement ce que vous recevez : marque, modèle, finition et documents.
02
Documents vérifiés avant paiement
Nous confirmons quels certificats (TÜV, JWL, VIA) existent pour votre modèle et les joignons au devis.
03
Montage vérifié
Déport, entraxe et dégagement des freins vérifiés pour votre voiture.
04
Immatriculation dans votre pays
Indiquez-nous où la voiture est immatriculée : nous vérifierons ce qui est requis et ce que nous pouvons fournir.

Besoin de documentation pour votre jante ?

Enkei est un fabricant japonais de jantes fondé en 1950, établi comme l'un des producteurs les plus importants en volume dans l'industrie mondiale des jantes aftermarket et OEM. Avec 7 359 employés, un chiffre d'affaires dépassant 206,4 milliards de yens en FY2025, et des sites de production au Japon, en Inde et aux États-Unis, Enkei opère à une échelle que peu de marques de jantes aftermarket peuvent égaler. La nomination de l'entreprise comme fournisseur officiel de McLaren F1 pour la saison 2026 souligne la crédibilité technique qui traverse l'ensemble de sa gamme — des pièces coulées grand public aux composants de précision pour le motorsport.
Hodoor s'approvisionne en jantes Enkei auprès de fournisseurs vérifiés et confirme la compatibilité, la finition et les options de livraison avant d'établir un devis.

Nous utilisons des cookies pour assurer le bon fonctionnement du site. En poursuivant votre navigation, vous acceptez leur utilisation. Politique de confidentialité