Rotiform DKR CustomSpec is a three-piece custom forged wheel available through the Rotiform made-to-order program, featuring a bold multi-spoke design available in Gloss White and Anthracite finishes.
Finitions
Prix complet, vérification du montage et estimation de livraison sous 24 h.
03 /Spécifications
Cette jante existe en plusieurs montages. La taille finale, l'ET et l'entraxe sont à confirmer avec notre conseiller.
Besoin des cotes exactes pour votre voiture ?
Nous joindrons le montage confirmé, la fiche technique complète et la documentation disponible à votre devis.

04 /Finition
Chaque finition est appliquée à la main et contrôlée avant expédition. Les finitions sur mesure ajoutent 2 semaines au délai.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Spécifications complètes
Rotiform DKR CustomSpec — Bold Statement Multi-Spoke in Three-Piece Forged Construction
Dominant Spoke Presence with Deep Concave Profiling, Available in Gloss White and Anthracite
Rotiform DKR CustomSpec prioritizes spoke presence and visual impact above all other design parameters. Where the DUS and similar clean-spoke designs minimize surface detailing, the DKR amplifies it — wider spokes, deeper concave transition, and bolder lip profile all contribute to a wheel that makes an immediate statement from any viewing angle. Available in Gloss White and Anthracite, each DKR set is assembled to customer specification.
Rotiform DKR Design: Wide High-Relief Spokes with Aggressive Concave Basin
The DKR carries seven or eight wide-body spokes with high relief surfaces — the spoke top surface sits noticeably raised above the adjacent inter-spoke windows, creating shadow lines along each spoke edge. The face descends into an aggressive concave basin: the transition from spoke plane to barrel is dramatic, producing a deep, three-dimensional appearance in side profile. The outer lip is wide and machined to a consistent diameter, reinforcing the visual mass of the assembly.
Rotiform DKR Engineering: Three-Piece Assembly with Wide-Barrel Configuration
Three-piece assembly for the DKR: forged aluminum center, inner barrel ring, and outer lip ring joined with stainless hardware. The center's high-relief spoke geometry requires careful CNC finishing to maintain spoke top surface consistency — height variation between spokes disrupts the shadow pattern. The inner barrel depth is specified at order to match the customer's offset requirements, with the aggressive concave face geometry maintained regardless of barrel depth variation.
DKR CustomSpec Technical Data
Construction: three-piece assembled. Center: forged aluminum. Hardware: stainless. Available finishes: Gloss White and Anthracite. Diameter, width, offset, bolt pattern: submitted at order. The two-finish limitation reflects the DKR's specific visual positioning — Gloss White for maximum visual impact, Anthracite for bold presence in a darker register.
DKR CustomSpec Finish Notes
Gloss White with machined lip delivers the most aggressive visual contrast — white spokes against brake hardware create strong tonal opposition at the wheel face. Anthracite provides bold spoke presence without the high-contrast approach; the dark body absorbs detail and presents the spoke relief geometry as surface texture rather than color contrast.
DKR CustomSpec Applications
DKR builds have included Rolls-Royce Cullinan, Mercedes-Benz G-Wagon, and Lamborghini Urus platforms — vehicles where scale and visual drama match the DKR's proportions. Performance builds on BMW M5 and Audi RS6 have also used the DKR where spoke presence is the design priority. Fitment for any vehicle is confirmed through Rotiform's ordering process.
Any Vehicle, Any Specification
The DKR CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certification
Les documents varient selon le modèle et le pays. Nous les vérifions pour votre jante avant le paiement et vous disons d'emblée ce qui est disponible.
01
Vous savez ce que vous recevez
Chaque devis précise exactement ce que vous recevez : marque, modèle, finition et documents.
02
Documents vérifiés avant paiement
Nous confirmons quels certificats (TÜV, JWL, VIA) existent pour votre modèle et les joignons au devis.
03
Montage vérifié
Déport, entraxe et dégagement des freins vérifiés pour votre voiture.
04
Immatriculation dans votre pays
Indiquez-nous où la voiture est immatriculée : nous vérifierons ce qui est requis et ce que nous pouvons fournir.

Besoin de documentation pour votre jante ?

Rotiform est une marque américaine premium de jantes fondée en Californie en 2009, spécialisée dans les designs en monoblock multi-pièces et personnalisés pour le marché du tuning performance et luxe. Depuis décembre 2025, Rotiform fait partie de Blue Design Group, un holding qui consolide des marques premium de jantes et de design automobile, apportant des ressources supplémentaires en ingénierie et design au pipeline de développement de Rotiform. La marque s'est forgé une présence motorsport grâce à son rôle de partenaire technique des équipes Ferrari Challenge et du programme GT, ajoutant une crédibilité technique qui étend la marque au-delà de la scène du tuning routier.
Hodoor s'approvisionne en jantes Rotiform auprès de fournisseurs vérifiés et confirme la compatibilité, la finition et les options de livraison avant d'établir un devis.

Nous utilisons des cookies pour assurer le bon fonctionnement du site. En poursuivant votre navigation, vous acceptez leur utilisation. Politique de confidentialité