Vossen Wheels GEN-02 (Monoblock)

Vossen GEN-02 - The Directional Forged Monoblock from the GEN Collection

Multi-Spoke Precision Engineering for Luxury SUVs and Performance Cars

Vossen GEN-02 is a directional forged monoblock wheel belonging to the GEN collection - a line built around the principle that spoke geometry should work with the rotation of the wheel rather than against it. Each GEN-02 is carved from a single forged aluminum alloy billet, combining the structural integrity of monoblock construction with a complex directional spoke layout that radiates outward from hub to rim.

Vossen GEN Collection: Forged + True Directional Design

The GEN designation identifies Vossen wheels that combine full custom forged manufacturing with a true directional spoke layout. Unlike symmetric wheels that appear identical on either side of the vehicle, directional wheels have a defined rotational orientation. The GEN-02 is produced in left-hand and right-hand variants to preserve the directional spoke sweep from all viewing angles. Every wheel is made to order with sizing and finish confirmed at point of purchase.

Vossen GEN-02 Design and Engineering: Directional Multi-Spoke Monoblock

The spoke architecture of the GEN-02 follows a multi-spoke directional pattern, with each spoke flowing in a consistent rotational arc from the hub face to the outer rim lip. Because the wheel is a forged monoblock - a single piece from face to barrel - there are no bolted joints, no welds and no barrel-to-face gaps. Available in diameters from 19 to 26 inches and widths from 8.5 to 12 inches, the GEN-02 is dimensioned for the full range of high-end SUV and saloon fitments.

Vossen GEN-02 Technical Specifications

Construction: Forged monoblock. Material: Forged aluminum alloy. Diameter: 19 to 26 inches. Width: 8.5 to 12 inches. Offset: specified per order. Directional design: separate left-hand and right-hand configurations. 48 custom finishes available from the Vossen catalogue.

Vossen GEN-02 Available Finishes

Two standard delivery finishes are offered: Gloss Clear, which preserves the natural brushed texture of the forged aluminum through a high-gloss protective lacquer; and Satin Black, which gives the wheel a dark, controlled appearance with a matte-satin surface. The full Vossen custom finish catalogue - 48 options including painted, brushed, and two-tone - is available to order through Hodoor Wheels.

Vossen GEN-02 Vehicle Fitment: Range Rover, Rolls-Royce Cullinan and Bentley Bentayga

The GEN-02 is a natural pairing for Range Rover Sport and Range Rover Autobiography, Rolls-Royce Cullinan, Bentley Bentayga, Mercedes-Maybach GLS and similar large luxury SUVs where 22- to 26-inch diameters are standard. The monoblock construction keeps rotating mass lower than an equivalent three-piece wheel at the same diameter and width, contributing to responsiveness on sport-configured suspension.

Any Vehicle, Any Specification

The GEN-02 is built to order for any vehicle. Hodoor Wheels sources and supplies Vossen GEN-02 wheels globally and can configure diameter, width, offset and finish to match any fitment requirement. Contact us or order directly at Hodoor Wheels.