Vossen Wheels GEN-22 (3-Piece)

Vossen GEN-22 (3-Piece) — Where Transitional Design Meets Full Customisation

Three Independent Finish Zones, One Coherent Design Language

The GEN-22 (3-Piece) emerged from Vossen's GEN Series to answer a specific design question: what happens when a high-density multi-spoke geometry needs to span the full width spectrum — 8.5 to 16 inches — while allowing completely different surface treatments on every component? The three-piece assembly resolves this by producing the machined face, inner barrel, and outer lip as separate pieces. Each is finished independently before hardware assembly at Vossen's Miami facility. The result is a build process where brushed face against a gloss barrel, matte center paired with a polished lip, or tinted spokes over a raw aluminum rim edge are all standard options rather than exceptions. This finish pairing flexibility is the defining characteristic that separates the GEN-22 (3-Piece) from the monoblock version of the same design.

GEN-22 (3-Piece): Design Vocabulary and Target Applications

The GEN-22 face uses a multi-spoke layout derived from a design brief positioned between hard-edged sport geometry and the refined, lower-tension aesthetics of high-end luxury marque wheels. This transitional character makes the GEN-22 (3-Piece) a natural fit for vehicles that balance both registers: the Mercedes-AMG G63, Bentley Bentayga Speed, BMW M5 Competition, and Rolls-Royce Ghost are all vehicles where the wheel needs to carry visual weight without reading as either purely functional or merely decorative. The spoke taper and depth create face density without bulk. At 18 to 24 inches in diameter — covering widths from 8.5 to 16 inches — the GEN-22 (3-Piece) spans both high-riding luxury SUV fitments and low-slung grand tourer specifications within the same size program.

GEN Series Center Cap System

The GEN-22 (3-Piece) runs Vossen's GEN Series center cap, machined from billet 6061 aluminum and configurable across four zones. The plate is either smooth (Classic) or pocketed (Sport). The trim ring, center nut, and center insert each receive a finish from four standard options — Gloss Black, Satin Black, Vossen Red, or Gloss Clear — or can be powder-coated in any of Vossen's 48 custom colors. The center cap is engineered to cover factory lug nuts and deliver a center-lock appearance on standard bolt-pattern vehicles. It is standard-fit on all GEN-22 (3-Piece) builds.

Vossen GEN-22 (3-Piece) Technical Specifications

Construction: Three-piece forged. Diameter range: 18 to 24 inches. Width range: 8.5 to 16 inches. Face: CNC-machined from forged aluminum alloy blank to the specified concave profile depth, from flat face to deep dish. Barrel and lip: Separate forged components joined with hardware at Vossen's Miami facility. This construction allows dish depth and overall width to be adjusted independently of the spoke design. Bolt pattern, center bore, and offset machined to order using vehicle-specific data collected from over 100 measurement points per platform. Finish program: 48 custom colors available independently across face, barrel, and lip. All sizes and finish configurations produced to order.

Vossen GEN-22 (3-Piece) Available Finishes

Standard finishes: Gloss Clear and Brickell Bronze. The three-piece construction allows each component — face, barrel, and lip — to carry a different finish from Vossen's 48-color library independently. Transparent coatings, solid colors, polished barrel surfaces, and custom powder options are all selectable per zone. Multi-finish configurations, where the barrel and center carry different treatments, are a standard part of the GEN-22 (3-Piece) build process.

Vossen GEN-22 (3-Piece) Vehicle Fitment and Custom Sizing

The GEN-22 (3-Piece) has been fitted to the Mercedes-AMG G63, Bentley Bentayga, BMW M5, and Rolls-Royce Ghost, as well as the wider range of luxury SUVs and grand tourers requiring 19- to 24-inch fitments. The 18-inch option covers sport and GT applications where a lower-profile tyre stack is preferred. Widths from 8.5 to 16 inches accommodate standard and staggered fitment configurations. Bolt pattern, center bore, and offset are confirmed to order — provide your vehicle details including any suspension or arch modifications for a confirmed specification before committing to an order.

Order Vossen GEN-22 (3-Piece) at Hodoor Wheels

The GEN-22 (3-Piece) is produced to order at Vossen's Miami facility. Lead time varies by size, finish combination, and multi-finish complexity. Independent finish specifications for face, barrel, and lip are part of the standard production process and do not require a separate order path. Contact Hodoor Wheels with your vehicle, preferred finish zones, and target diameter and width to receive a confirmed quote and production timeline.