Apex Wheels ML-7RT is a forged Touring Line monoblock wheel with a seven-spoke design. 10,000-ton forged 6061-T6, 5-lug, 18 to 20 inches, 3 finishes, for Porsche, BMW, Audi, and European performance GT platforms.
Finishes
Full price, fitment check and delivery estimate within 24h.
03 /Specifications
This wheel is available in multiple fitments. Final size, offset and bolt pattern are to be confirmed with our manager.
Need exact specs for your car?
We'll include the confirmed fitment, full spec sheet and available documentation with your quote.

04 /Finish
Each finish is hand-applied and quality-checked before shipping. Custom finishes available on request add 2 weeks to lead time.
Anthracite
Race Silver
Gunmetal Gray
05 /Full specifications
Apex Wheels ML-7RT — Seven-Spoke 10,000-Ton Forged Touring Line Wheel
Touring Line Precision: Seven Forged Spokes Engineered for Porsche, BMW, and Audi GT Applications
The Apex ML-7RT is a seven-spoke, monoblock forged wheel from the Apex Touring Line. It occupies the gap between the aggressive eight- and ten-spoke Touring models and the multi-spoke mesh designs — seven evenly distributed spokes produce a face composition that photographs as open and airy while delivering the structural properties Apex requires from its forged catalogue. The ML-7RT targets Porsche 718, 911, BMW M-series, and Audi S/RS owners who want a forged upgrade at a diameter range their chassis actually uses.
ML-7RT Manufacture: 10,000-Ton Press, 6061-T6 Aluminium Billet
Apex forges the ML-7RT under 10,000 tons of press pressure from a 6061-T6 aluminium billet, crushing the material to close internal porosity and develop a continuous, directional grain structure that runs through every spoke from hub to rim. After pressing, the blank is heat-treated to T6 temper to maximise precipitation hardening before the face, spoke surfaces, and hub area are CNC-machined to final geometry. The seven-spoke layout provides one fewer load path than the ML-10RT's ten-spoke design but achieves comparable barrel rigidity by allowing each spoke to carry a wider cross-section — a trade Apex makes intentionally for the lighter platforms the ML-7RT primarily targets.
ML-7RT Specification Range
Offered in 18-inch, 19-inch, and 20-inch diameters with five-lug bolt circle options. Apex publishes fitment data specific to Porsche 718 Cayman and Boxster, 911 (991/992), BMW M2, M3, M4, and Audi B9 S4/RS4 caliper clearance. Each diameter is available in a range of widths and offsets to cover OEM-width and +10mm track-width configurations without spacers.
ML-7RT Surface Treatment
Matte Gunmetal, Gloss Graphite, and Brushed Titanium. The forged face takes machine-cut finishing differently from a cast surface — the denser grain structure produces a more uniform brush direction and a smoother milled edge, which is visible in the brushed titanium finish as a tighter linear texture than comparable cast brushed wheels.
ML-7RT Structural Specification
Load rating and deflection data published per size. The ML-7RT meets Touring Line structural requirements, which exceed the Evolution Line flow-formed specification for sustained lateral load — appropriate for the high-output Porsche and BMW M platforms it primarily serves. For drivers requiring the maximum Apex load rating at a five-spoke configuration, the VS-5RX Touring Line is the closest alternative.
ML-7RT Technical Summary
Seven-spoke 10,000-ton forged monoblock. 6061-T6 aluminium. 18, 19, 20-inch diameters. Five-lug options. Matte Gunmetal, Gloss Graphite, Brushed Titanium. Published load and deflection data per size.
Any Vehicle, Any Specification
The ML-7RT is available across a wide range of Porsche, BMW, and Audi configurations within its Touring Line specification. Contact Apex Wheels or an authorised distributor to confirm fitment, finish, and availability for the ML-7RT on your specific vehicle.
06 /Certification
Documents differ by model and country. We check them for your exact wheel before you pay — and tell you upfront what's available.
01
Clear about what you get
Every quote states exactly what you're getting: brand, model, finish and documents.
02
Documents checked before payment
We confirm which certificates (TÜV, JWL, VIA) exist for your model and send them with the quote.
03
Fitment verified
Offset, PCD and brake clearance checked for your exact car.
04
Registration in your country
Tell us where the car is registered — we'll check what's needed and what we can provide.

Need documentation for your wheel?

Apex Wheels, operated by Aftermarket Performance Express Inc. and based in Pleasanton, California, was founded with a specific mission: to engineer lightweight, track-capable wheels optimised for BMW and European performance platforms. This focus has shaped every aspect of the brand's product development, from the spoke geometry chosen to clear brake caliper envelopes specific to M-series and sport package BMWs, to the offset profiles that fill arch clearances on lowered European vehicles without requiring spacers. The result is a wheel brand that the European platform community trusts not as a compromise, but as a purpose-built solution.
Hodoor sources Apex Wheels wheels through verified supplier channels and confirms fitment, finish and delivery before quoting.

We use cookies to keep the site running smoothly. By continuing to browse, you agree to their use. Privacy policy