Apex Wheels SM-10 is a flow-formed Evolution Line wheel offered in 17 to 19 inches and 3 finishes. A multi-spoke performance design engineered for BMW and European platforms.
Finishes
Full price, fitment check and delivery estimate within 24h.
03 /Specifications
This wheel is available in multiple fitments. Final size, offset and bolt pattern are to be confirmed with our manager.
Need exact specs for your car?
We'll include the confirmed fitment, full spec sheet and available documentation with your quote.

04 /Finish
Each finish is hand-applied and quality-checked before shipping. Custom finishes available on request add 2 weeks to lead time.
Anthracite
Race Silver
Satin Black
05 /Full specifications
Apex Wheels SM-10 — Ten-Spoke Mesh Flow-Formed Wheel for BMW and European Platforms
Evolution Line Multi-Spoke: The SM-10 Delivers Open-Face Mesh Styling at Flow-Formed Weight
The Apex SM-10 is a ten-spoke, flow-formed aluminium wheel from the Apex Evolution Line. Where most flow-formed wheels favour three-, five-, or seven-spoke designs, the SM-10 adopts a dense ten-spoke mesh pattern that fills the face with shadow and depth. It was designed for BMW and European platform owners who want the visual complexity of a multi-spoke forged wheel but require a price point and rim-availability that only flow-formed production can provide.
SM-10 Construction: Spin-Formed Barrel, Precision-Machined Ten-Spoke Face
Like every Evolution Line wheel, the SM-10 begins as a low-pressure cast aluminium blank. The barrel section is then spin-formed over a heated mandrel, which cold-works the rim wall and elevates its tensile properties toward the lower end of the forged specification range. The ten-spoke face is machined after forming to achieve spoke width uniformity within tight tolerances — a requirement for a ten-spoke design where any visual irregularity across the face is immediately apparent. Each spoke tapers from a wide root at the hub flange to a narrower tip at the rim shelf, maintaining stiffness where it matters while shedding mass toward the outer circumference.
SM-10 Sizing and Platform Coverage
Apex offers the SM-10 in 18-inch, 19-inch, and 20-inch diameters to cover a broad range of BMW E-series, F-series, and G-series chassis. The 20-inch option extends the SM-10's reach into larger-displacement M-series and 5 Series GT applications where OEM diameters already sit at 19 or 20 inches. All sizes ship with hub-centric bore and confirmed caliper clearance data for OEM and common aftermarket brake upgrades.
SM-10 Finish Selection
The SM-10 is available in Satin Black, Anthracite, and Hyper Silver finishes. The hyper silver option uses a machine-cut face that reveals raw grain across each spoke face, contrasting with the deeper barrel shadow created by the ten-spoke density. Satin black provides a stealth appearance for builds seeking to minimise visual mass at the wheel.
SM-10 Application: Street Builds and Occasional Track Use
The SM-10 is positioned as a street-primary wheel with track compatibility for occasional lapping sessions. Drivers planning sustained circuit use at reduced weight should consider the SM-10RS Sprint Line forged variant, which provides greater stiffness and a reduced rotating mass figure suited to repeated hard braking and cornering cycles.
SM-10 Technical Summary
Ten-spoke flow-formed construction. Available in 18, 19, and 20 inches. BMW hub-centric bore. Satin Black, Anthracite, and Hyper Silver finishes. JWL and VIA structural compliance. Published per-size weight data.
Any Vehicle, Any Specification
The SM-10 is available in configurations to suit a wide range of vehicles and fitment requirements. Contact Apex Wheels or an authorised distributor for chassis-specific sizing, finish availability, and current lead times for your application.
06 /Certification
Documents differ by model and country. We check them for your exact wheel before you pay — and tell you upfront what's available.
01
Clear about what you get
Every quote states exactly what you're getting: brand, model, finish and documents.
02
Documents checked before payment
We confirm which certificates (TÜV, JWL, VIA) exist for your model and send them with the quote.
03
Fitment verified
Offset, PCD and brake clearance checked for your exact car.
04
Registration in your country
Tell us where the car is registered — we'll check what's needed and what we can provide.

Need documentation for your wheel?

Apex Wheels, operated by Aftermarket Performance Express Inc. and based in Pleasanton, California, was founded with a specific mission: to engineer lightweight, track-capable wheels optimised for BMW and European performance platforms. This focus has shaped every aspect of the brand's product development, from the spoke geometry chosen to clear brake caliper envelopes specific to M-series and sport package BMWs, to the offset profiles that fill arch clearances on lowered European vehicles without requiring spacers. The result is a wheel brand that the European platform community trusts not as a compromise, but as a purpose-built solution.
Hodoor sources Apex Wheels wheels through verified supplier channels and confirms fitment, finish and delivery before quoting.

We use cookies to keep the site running smoothly. By continuing to browse, you agree to their use. Privacy policy