The Rotiform KPS CustomSpec is a forged monoblock wheel from the Rotiform CustomSpec made-to-order program. Available in 16 to 24 inch diameters, configured to any width, offset, bolt pattern, and finish per order.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Especificaciones completas
Rotiform KPS CustomSpec — Wide-Face Concave Spoke Built for Track and VIP Builds
Precision-Milled Single-Piece Forging, Configured to Order
Rotiform KPS CustomSpec targets two distinct ends of the enthusiast spectrum: performance track platforms and VIP-style luxury fitments. The wheel's wide-face spoke profile scales gracefully across both applications, maintaining visual weight at large diameters without looking cluttered. Each KPS is a made-to-order piece — the buyer specifies sizing, bolt pattern, and surface treatment at time of purchase.
Rotiform KPS Design: Wide-Face Spokes with Stepped Concave Transition
The KPS carries broad, flat-sided spokes that originate wide at the hub flange and taper minimally to the hoop. Rather than the sharp concave geometry of some Rotiform monoblock designs, the KPS uses a stepped concave face — the spokes descend into the barrel along a measured shelf, creating depth without the dramatic dish angle. The spoke count and spacing leave generous ventilation windows that expose brake hardware at large diameter fitments.
Rotiform KPS Engineering: Precision-Milled Forged Construction
Each KPS center is forged from aircraft-specification aluminum billet before CNC milling removes material between spokes and shapes the face profile. The forging step establishes grain orientation aligned with structural load paths; CNC finishing produces the tight dimensional tolerances required for hub-centric fitment. The process yields a wheel that is simultaneously lighter and stronger than comparably sized cast products.
KPS CustomSpec Specifications
Construction: precision-milled forged monoblock. Material: aircraft-spec aluminum alloy. All dimensional parameters — diameter, width, offset, bolt pattern — are set at order and held to drawing through the machining process. No floor stock is available; each KPS is fabricated to the customer's vehicle data.
KPS CustomSpec Finish Options
Available treatments include Brushed Silver, Polished, Gloss Black, and Satin Gunmetal. The Brushed Silver treatment suits VIP and prestige builds where a premium metallic surface is preferred. Gloss Black and Satin Gunmetal suppress reflectivity for performance-oriented aesthetics, while the Polished option maximizes surface contrast with darker spoke regions.
KPS CustomSpec Vehicle Applications
The KPS has been installed on Lexus LS, Mercedes-Benz S-Class, and Porsche Panamera platforms, among others. Its spoke width accommodates both luxury vehicles where a full face is preferred and performance platforms where structural spoke width is desirable. Rotiform confirms fitment data for any vehicle at time of order.
Any Vehicle, Any Specification
The KPS CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Rotiform es una marca americana premium de llantas fundada en California en 2009, establecida como especialista en diseño de llantas monoblock multipiezas y personalizadas para el mercado del tuning de rendimiento y lujo. Desde diciembre de 2025, Rotiform forma parte de Blue Design Group, un holding que consolida marcas premium de llantas y diseño automotriz, aportando recursos adicionales de ingeniería y diseño al pipeline de desarrollo de Rotiform. La marca ha establecido una presencia en el motorsport a través de su papel como socio técnico de los equipos Ferrari Challenge y del programa GT, añadiendo credibilidad técnica que extiende la marca más allá de la escena del tuning callejero.
Hodoor adquiere las llantas Rotiform a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad