Three-piece forged wheel from Rotiform's CustomSpec program. The VCE-T offers staggered fitment capability with 17 finish options. Available 16-24" to custom specification.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Especificaciones completas
Rotiform VCE-T CustomSpec — Staggered-Fitment Configuration of the VCE Design
Three-Piece Forged Construction Engineered for Asymmetric Front/Rear Sizing
Rotiform VCE-T CustomSpec addresses staggered fitment requirements directly. Where the standard VCE serves symmetric four-corner setups, the VCE-T is engineered from the outset for vehicles that run a narrower front and wider rear — Porsche, Ferrari, and wide-body European cars being primary applications. The three-piece architecture makes asymmetric widths straightforward: the barrel component is fabricated to the required front or rear dimension while sharing the same forged center section. Each set is ordered specifying front and rear dimensions separately.
Rotiform VCE-T Design: Multi-Spoke Face Shared with VCE, Barrel Configured to Order
The VCE-T uses the same forged center face as the VCE — flowing curved spokes, centered hub, defined concave dish — combined with a barrel assembly sized to staggered fitment requirements. The spoke curvature and face depth are consistent between front and rear, so the wheel appears visually matched regardless of barrel width difference. The outer lip profile on each piece is finished to match, maintaining set coherence despite dimensional asymmetry.
Rotiform VCE-T Engineering: Three-Piece Forged Architecture
Three-piece construction for the VCE-T means a forged aluminum center, inner barrel ring, and outer barrel ring joined by hardware. The barrel halves are sourced in widths matching the submitted front and rear specifications, then assembled with the center to produce finished front and rear wheels. This manufacturing flexibility is why three-piece construction is specified for staggered-fitment programs — barrel changes do not require a new center forging.
VCE-T CustomSpec Technical Notes
Construction: three-piece forged. Order requires separate front and rear dimensional specifications (diameter, width, offset). Bolt pattern is constant across front and rear. Lead time confirmed at order. Rotiform verifies staggered fitment compatibility for the submitted vehicle before production.
VCE-T CustomSpec Finish Selection
Finishes available match VCE availability: Matte Black, Brushed Titanium, Polished, Gloss Gunmetal, and others confirmed at order. Staggered sets are finished identically across front and rear for set consistency.
VCE-T CustomSpec Applications
Documented fitments include Porsche 991 GT3, Ferrari 458, and BMW M6 Gran Coupe — vehicles where rear tires are substantially wider than front. The VCE-T's three-piece flexibility accommodates the specific offset and width combinations these platforms require.
Any Vehicle, Any Specification
The VCE-T CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Rotiform es una marca americana premium de llantas fundada en California en 2009, establecida como especialista en diseño de llantas monoblock multipiezas y personalizadas para el mercado del tuning de rendimiento y lujo. Desde diciembre de 2025, Rotiform forma parte de Blue Design Group, un holding que consolida marcas premium de llantas y diseño automotriz, aportando recursos adicionales de ingeniería y diseño al pipeline de desarrollo de Rotiform. La marca ha establecido una presencia en el motorsport a través de su papel como socio técnico de los equipos Ferrari Challenge y del programa GT, añadiendo credibilidad técnica que extiende la marca más allá de la escena del tuning callejero.
Hodoor adquiere las llantas Rotiform a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad