3SDM 0.05 SF

3SDM 0.05 SF - The Iconic Five-Spoke Spin Forged Wheel

Retro-Inspired Design with Deep Concave Depth and Modern Spin Forged Construction

The 3SDM 0.05 SF is the spin forged variant of 3SDM's most recognisable wheel design — a five-spoke construction that draws direct inspiration from the legendary Ferrari F40's wheel aesthetic while applying 3SDM's own engineering language. Available in 18-inch diameter with an 8.5-inch width, the 0.05 SF delivers the visual character of a multi-piece forged wheel in an accessible flow-formed monoblock package.

3SDM 0.05 SF Design: Five-Spoke Concave with Retro Straight Lines

The 0.05's spoke layout references classic five-spoke star designs from the 1980s and early 1990s, with straight, clean lines rather than curved or branching profiles. 3SDM retained this fundamental geometry while adding a substantial concave depth and a machined face. The result is a wheel that reads as classically proportioned from a distance but rewards closer inspection with the depth and machining detail of a performance-focused design. Available in Silver Cut, Matt Black, and White Cut finishes.

3SDM 0.05 SF Technical Specifications

Construction: Spin forged (flow formed) monoblock. Material: Aluminum alloy. Available in 18-inch diameter, 8.5-inch width. PCD options include 5x100, 5x112, 5x114.3, and 5x120. The spin forging process applies pressure to the wheel barrel while it is rotating after casting, stretching the material to its final width and improving the grain structure for greater strength and reduced weight relative to a standard cast equivalent. Load rating: 875kg.

3SDM 0.05 SF Finishes: Silver Cut, Matt Black, White Cut

Silver Cut: a polished machined face with a contrasting matt barrel. Matt Black: an all-over matt dark finish with the same machined spoke detail. White Cut: a white painted base with a machined face producing a bright two-tone appearance. All three finishes are available in the same 18x8.5 sizing across the available PCD range.

3SDM 0.05 SF Performance and Fitment

The spin forged construction gives the 0.05 SF a weight advantage over its standard cast counterpart, with a rated load of 875kg. This makes it appropriate for a wide range of cars from smaller hot hatches to larger saloons. The 18-inch size positions it for fitment across the most common platforms in the VW Group, BMW, and Honda ranges, as well as performance-oriented applications like the Mazda MX-5 and Alfa Romeo Spider. Offset options span a broad range covering stock and mildly modified setups.

3SDM 0.05 SF vs. 3SDM 0.05 Cast

The standard 3SDM 0.05 is produced as a conventional cast monoblock with a 690kg load rating. The 0.05 SF uses the same design but adds a spin forming step to the manufacturing process, raising the load rating to 875kg and producing a lighter finished wheel. Both share the same 18x8.5 sizing and the same range of finishes. The 0.05 SF is the upgrade option where lower weight and higher structural integrity are priorities.

Who is the 3SDM 0.05 SF For?

The 0.05 SF suits drivers who are drawn to classic five-spoke aesthetics but want the weight and load rating benefits of a flow-formed process. It works across a wide range of cars from sports coupes to compact hot hatches, and the Silver Cut, Matt Black, and White Cut finishes give flexibility to match different body colours and styles. The 3SDM 0.05 SF can be ordered across a full range of PCD and offset options to fit vehicles — not just the models listed above — contact 3SDM directly for custom fitment requirements.