3SDM 0.08

3SDM 0.08 - The Large-Diameter Cast Five-Spoke for 20-Inch Fitment

A Bigger, More Aggressive Evolution of 3SDM's Five-Spoke Philosophy

The 3SDM 0.08 is a cast monoblock wheel designed around the visual language of 3SDM's established five-spoke lineup, scaled up and reworked specifically for 20-inch applications. Where the 0.05 and its spin forged variant target 18-inch platforms, the 0.08 steps into a larger diameter category with proportions and spoke geometry optimised for the wider, deeper fitments demanded by larger saloons, SUVs, and performance cars running 20-inch tyres.

3SDM 0.08 Design: The Five-Spoke Concept Scaled and Refined for 20 Inches

3SDM describes the 0.08 as taking the core concept of a straight-spoke five-spoke design and reworking it for a larger stage. The spokes on the 0.08 are wider and the spoke windows more open, giving a more assertive appearance than the 0.05's tighter layout. The machined Silver Cut finish is the only available option, combining a polished face with contrasting barrel surfaces for a clean, high-contrast appearance suited to the 20-inch diameter. Available in 20x9.0 and 20x10.5 widths for staggered and square setups.

3SDM 0.08 Technical Specifications

Construction: Cast monoblock. Material: Cast aluminum alloy. Available in 20-inch diameter, 9.0- and 10.5-inch widths. PCD options include 5x112, 5x114.3, and 5x120. Load rating: 815kg. The 10.5-inch width option opens the 0.08 to staggered fitments on wider rear-wheel-drive platforms including BMW M-series and Audi RS models. The 9.0-inch width suits standard fitment front axles on a wide range of European platforms running 5x112 or 5x120 bolt patterns.

3SDM 0.08 Finish: Silver Cut

The 0.08 is available exclusively in Silver Cut — a machined and polished face against a contrasting barrel. This finish is a 3SDM signature across their cast lineup, maintaining consistency with the 0.05 and 0.06 ranges while standing clearly as a larger-diameter counterpart. The Silver Cut finish requires standard care; a pH-neutral wheel cleaner is recommended to preserve the machined surfaces and prevent premature oxidation.

3SDM 0.08 Fitment Applications

The 20-inch sizing makes the 0.08 a natural choice for BMW 3 and 5 Series, Audi A4, A5, and A6, Volkswagen Passat, and Audi RS models. The wider 10.5-inch option accommodates rear axles on staggered setups for Audi RS4, RS5, RS6, RS7, BMW M3, M4, and M5. Ford Mustang, Nissan GTR, and Maserati Quattroporte are also listed fitments. The wheel's 815kg load rating is appropriate for heavier executive platforms at 20-inch diameter.

3SDM 0.08 vs. the 0.05 and 0.05 SF

The 0.08 is not simply a scaled 0.05 — the spoke geometry has been redesigned for the 20-inch diameter with wider spoke sections and more open spoke windows to suit the proportions of larger vehicles. The 0.05 and 0.05 SF are optimised for 18-inch fitments with a narrower max width of 8.5 inches. If a vehicle requires 20-inch wheels with a five-spoke design, the 0.08 is the appropriate 3SDM option in this segment of the range.

Ordering the 3SDM 0.08

The 3SDM 0.08 is stocked in Silver Cut in 9.0x20 and 10.5x20 sizes across 5x112, 5x114.3, and 5x120 bolt patterns. As with all 3SDM cast wheels, offset options are set at the manufacturing stage — buyers should confirm the correct ET and centre bore for their specific vehicle before ordering. The 0.08 can be ordered to fit a wide variety of vehicles and not just the models listed above — contact a 3SDM authorised retailer for fitment confirmation.