Apex Wheels VS-5RS is a forged Sprint Line monoblock wheel — the lightest wheel Apex makes. 10,000-ton forged 6061-T6, 17 to 20 inches, 6 finishes, for BMW, Porsche, Audi, Toyota, and more.
Finishes
Full price, fitment check and delivery estimate within 24h.
03 /Specifications
This wheel is available in multiple fitments. Final size, offset and bolt pattern are to be confirmed with our manager.
Need exact specs for your car?
We'll include the confirmed fitment, full spec sheet and available documentation with your quote.

04 /Finish
Each finish is hand-applied and quality-checked before shipping. Custom finishes available on request add 2 weeks to lead time.
Anthracite
Brushed Clear
Motorsport Gold
Race Silver
Satin Black
Satin Bronze
05 /Full specifications
Apex Wheels VS-5RS — Sprint Line Flagship: The Lightest Wheel in the Apex Catalogue
Five-Spoke Forged Monoblock Built Exclusively for Minimum Weight at Maximum Track Loads
The Apex VS-5RS is the flagship of the Apex Sprint Line and the lightest wheel Apex produces. It carries a five-spoke forged monoblock construction tuned to the minimum structural threshold Apex approves for circuit and time-attack use, then stops — no additional material, no decorative machining beyond what surface finish requires, no concession to weight for the sake of appearance. The VS-5RS exists for one purpose: getting the least rotating mass onto a BMW, Porsche, or European performance chassis while maintaining the structural integrity required to survive repeated hard-braking, high-lateral-load track sessions.
VS-5RS Manufacture: Pressed 10,000-Ton Forging, Minimum-Mass CNC Finish
Apex presses VS-5RS blanks under 10,000 tons from 6061-T6 aluminium billet, developing a closed-die grain structure that eliminates the internal porosity present in cast and flow-formed wheels. After T6 heat treatment, the five spoke profiles are CNC-machined to their final cross-section — which Apex specifies as the minimum section area that meets VS-5RS's structural rating at the most demanding size in the product range. No excess material is left for visual effect. The hub face, lug bores, and center bore are precision-ground for hub-centric fit. Published per-size weights for the VS-5RS are the reference figure against which every other Apex wheel is measured.
VS-5RS Sizing and Fitment
Offered in 17-inch through 20-inch diameters, the VS-5RS covers more of the BMW and Porsche chassis range than any other Sprint Line wheel. Apex publishes confirmed fitment data for every available size, including caliper clearance for Brembo six-piston front assemblies on 911 GT3, AP Racing circuit kits on E46 M3, and BMW M Performance calipers across M2/M3/M4 generations. Five-lug bolt circles are available for the full BMW and Porsche hub specification range.
VS-5RS Finishes
Satin Black and Brushed Clear. Two finishes only — consistent with the VS-5RS's weight-first development brief. Additional finish options add processing mass that conflicts with the wheel's raison d'être.
VS-5RS and the Sprint Line
The VS-5RS sits at the top of the Sprint Line alongside the SM-8RS and SM-10RS. Where the SM series uses eight or ten spokes for a denser face composition, the VS-5RS uses five spokes to maximise face openness — an aesthetic preference that also marginally reduces total material for a given structural rating. For drivers who need the VS-5RS's five-spoke design at an increased load rating for heavier vehicles, the VS-5RE Enduro Line variant provides a 2100 lb per-corner rating.
VS-5RS Technical Summary
Five-spoke 10,000-ton forged monoblock. 6061-T6 aluminium. 17 to 20-inch diameters. Five-lug options. Satin Black and Brushed Clear only. Published per-size weights and load ratings.
Any Vehicle, Any Specification
The VS-5RS is available for a wide range of BMW and Porsche chassis configurations. Contact Apex Wheels or an authorised distributor to confirm diameter, bolt pattern, offset, and current availability for the VS-5RS on your vehicle.
06 /Certification
Documents differ by model and country. We check them for your exact wheel before you pay — and tell you upfront what's available.
01
Clear about what you get
Every quote states exactly what you're getting: brand, model, finish and documents.
02
Documents checked before payment
We confirm which certificates (TÜV, JWL, VIA) exist for your model and send them with the quote.
03
Fitment verified
Offset, PCD and brake clearance checked for your exact car.
04
Registration in your country
Tell us where the car is registered — we'll check what's needed and what we can provide.

Need documentation for your wheel?

Apex Wheels, operated by Aftermarket Performance Express Inc. and based in Pleasanton, California, was founded with a specific mission: to engineer lightweight, track-capable wheels optimised for BMW and European performance platforms. This focus has shaped every aspect of the brand's product development, from the spoke geometry chosen to clear brake caliper envelopes specific to M-series and sport package BMWs, to the offset profiles that fill arch clearances on lowered European vehicles without requiring spacers. The result is a wheel brand that the European platform community trusts not as a compromise, but as a purpose-built solution.
Hodoor sources Apex Wheels wheels through verified supplier channels and confirms fitment, finish and delivery before quoting.

We use cookies to keep the site running smoothly. By continuing to browse, you agree to their use. Privacy policy