The BBS CH is a flow-formed split-spoke wheel with a motorsport-derived design and a replaceable stainless-steel rim protector. Back-milled spokes, counter-pressure cast, weight-optimised by FEM analysis. Original BBS design. Available at Hodoor Wheels.
Finishes
Full price, fitment check and delivery estimate within 24h.
03 /Specifications
This wheel is available in multiple fitments. Final size, offset and bolt pattern are to be confirmed with our manager.
Need exact specs for your car?
We'll include the confirmed fitment, full spec sheet and available documentation with your quote.

04 /Finish
Each finish is hand-applied and quality-checked before shipping. Custom finishes available on request add 2 weeks to lead time.
Satin Black
Gloss Black
Matte Gunmetal
Gloss Gunmetal
Satin Silver
Satin Bronze
Anthracite
05 /Full specifications
The Original Split-Spoke Design
Some wheels follow a trend. The BBS CH set one. Its split-spoke geometry - long, angled spokes that create a sense of motion even when the car is stationary - became a reference point for an entire generation of performance wheels. The design is clean, purposeful, and instantly recognisable, which is why it remains one of the most requested shapes in the BBS catalogue.
Where Flow-Forming Meets Counter-Pressure Casting
The CH is produced using BBS's counter-pressure casting process, followed by flow-forming of the rim area. This is the same technology the brand introduced to the aftermarket in 1996 and has refined over decades of motorsport and OEM supply. During flow-forming, the cast blank is heated and rolled under high pressure, compacting the material and aligning its grain structure. This increases strength and stiffness while reducing weight, and it allows the CH to achieve a stiffness-to-weight ratio that a conventional cast wheel cannot approach. The wheel is also weight-optimised through FEM analysis, ensuring that material is placed where it is needed and removed where it is not. BBS develops this geometry in-house, and no replica producer has access to the tooling or the thermal treatment process.
The CH Design
The CH's defining feature is its long, angled split-spoke pattern - a design that has become a reference point for enthusiasts because it looks equally correct on a Volkswagen Golf R and a Porsche Cayenne. The spokes are back-milled to remove unnecessary material, and the wheel includes a replaceable stainless-steel rim protector - a detail that protects the rim edge from kerb damage. The face is visually dynamic, but the flow-formed barrel ensures that the density does not come at the cost of performance. It is a wheel that reads as motorsport-derived without looking overstated.
For Cars That Demand Proven Engineering
The BBS CH suits owners of Volkswagen Golf R, Audi S4, and Porsche Cayenne - cars where the wheel must perform under load and look correct at every viewing distance. Tell us which car you are building for, and we will confirm the CH specification before the order is signed off.
BBS CH - Any Vehicle, Any Specification
BBS CH is available in diameters from 17- to 20-inch and widths from 7.5 to 9.5 inches, covering a broad range of platforms from hot hatches to full-size SUVs. The CH is particularly suited to Volkswagen Golf R, Audi S4, Porsche Cayenne, and BMW 3 Series builds where the motorsport-derived split-spoke geometry reads as both technically correct and visually dynamic. The replaceable stainless-steel rim protector makes the CH a practical daily-driver choice as well as a weekend performance option. Custom offsets and a full range of PCD configurations are available through our fitment consultation programme. Contact Hodoor Wheels for a fitment consultation and pricing.
06 /Certification
Documents differ by model and country. We check them for your exact wheel before you pay — and tell you upfront what's available.
01
Clear about what you get
Every quote states exactly what you're getting: brand, model, finish and documents.
02
Documents checked before payment
We confirm which certificates (TÜV, JWL, VIA) exist for your model and send them with the quote.
03
Fitment verified
Offset, PCD and brake clearance checked for your exact car.
04
Registration in your country
Tell us where the car is registered — we'll check what's needed and what we can provide.

Need documentation for your wheel?

BBS is the original pioneer of the performance wheel — founded in 1970 in Schiltach, Germany, with BBS Japan established in 1983. The brand built its reputation on a single conviction: that motorsport engineering should reach the road, not remain locked in the paddock. That conviction is embodied most clearly in BBS Flow Forming technology — the process that defines the brand's Performance Line and brings racing-derived engineering to a broad range of luxury and performance vehicles.
Hodoor sources BBS wheels through verified supplier channels and confirms fitment, finish and delivery before quoting.

We use cookies to keep the site running smoothly. By continuing to browse, you agree to their use. Privacy policy