HRE HD188H (2-Piece)

HRE HD188H (2-Piece) - The Flush-Face Forged Truck Wheel with Concealed Assembly

Invisible Hardware, Uninterrupted Spoke Lines: The H Designation Explained

HRE HD188H (2-Piece) is a concealed-fastener forged truck wheel from HRE Performance Wheels, engineered exclusively for heavy-duty pickup and oversized SUV builds where exterior aesthetics are as critical as mechanical performance. Unlike its sibling, the HD188, the HD188H tucks every assembly point behind the spoke face - eliminating visible bolt heads entirely and producing a clean, monolithic surface across the entire wheel.

HRE HD188H - What the H Stands For

The H suffix in HD188H denotes Hidden - and it informs every visual aspect of this wheel. By relocating fastening points to the rear of the center casting, the HD188H reads as a single cohesive form rather than an assembled component. Spokes flow uninterrupted from hub to barrel, without hardware interrupting the surface geometry. This flush presentation appeals particularly to luxury truck builds, expedition-spec Hummer H1 platforms, and high-end 4x4 configurations where the wheel is expected to carry the same design intent as the rest of the vehicle.

HRE HD188H FMR Barrel and Two-Tone Capability

The HD188H is built around HRE's FMR (Forged Monoblok Rim) - a continuously forged, one-piece barrel in aerospace 6061-T6 alloy that achieves superior rigidity and concentricity compared to conventional spun or welded barrel units. No inner air seal is required, simplifying the assembly and reducing potential maintenance points over the life of the wheel. Because the barrel and spoke casting remain discrete components, each can be finished independently - allowing two-tone configurations where spoke color and barrel color are specified separately, a capability unavailable on single-piece forgings.

HRE HD188H (2-Piece) Technical Specifications

Construction: 2-Piece FMR with concealed fasteners. Alloy: 6061-T6 aerospace forging. Diameters: 20- and 22-inch. Offset, width, bolt pattern, and center bore: individually CNC-machined per order. Lip profile: Angled (standard) or Machined (optional upgrade). Center cap: standard billet HRE cap or optional engraved variant. TPMS-compatible and factory lug-compatible. Manufactured in the USA. Backed by a Lifetime Structural Warranty and a 2-Year Finish Warranty.

HRE HD188H Color Selection

The HD188H draws from HRE's catalog of 80-plus paint and metallic finishes, spanning Gloss Black, Satin Black, Satin Charcoal, Gloss Charcoal, Satin Silver, Gloss Silver, Polished, Brushed Dark Clear, and a broad range of additional specialty tones. Two-tone ordering is a defining strength of the 2-piece format: the spoke center and FMR barrel may each receive a separate color treatment - pairing Satin Charcoal spokes with a Gloss Charcoal barrel, for example, or Satin Black against a Dark Clear rim. Bespoke finishes outside the catalogued range are accepted on a quote basis.

HRE HD188H (2-Piece) Applications: Hummer H1, Expedition 4x4, Ram, F-Series, Silverado

The HD188H has found particular favor on Hummer H1 conversions and purpose-built expedition platforms, where the concealed hardware complements the vehicle's utilitarian exterior language. It is also fielded across conventional 1/2 ton and 3/4 ton configurations including Ram 1500 and Ram 2500, Ford F-150 and F-250, Chevrolet Silverado, and GMC Sierra. Elevated suspension builds and aggressive tire fitments are accommodated through custom offset and width specifications, machined individually for each truck.

HRE HD188H - Order to Your Specification

Every HD188H is built to order. Diameter, width, offset, bolt pattern, center bore, lip style, cap selection, spoke finish, and barrel finish are each confirmed at the point of order and manufactured to those parameters. Provide your vehicle details - year, make, model, and target tire size - and we will supply a complete fitment and pricing quote.