Apex Wheels FL-5 is a flow-formed Evolution Line wheel offered in 18 inches and 3 finishes. A five-spoke performance design engineered for BMW and European platforms.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Anthracite
Race Silver
Satin Black
05 /Especificaciones completas
Apex Wheels FL-5 — Single-Diameter Five-Spoke Flow-Formed Wheel in 18 Inches
Evolution Line Precision: One Diameter, Maximum Fitment Focus, Five Classic Spokes
The Apex FL-5 is a five-spoke, flow-formed aluminium wheel from the Apex Evolution Line, produced exclusively in an 18-inch diameter. That single-size discipline defines the FL-5's purpose: Apex engineered this wheel specifically for chassis applications where 18 inches is not just a preference but a structural or clearance requirement — suspension geometry, brake package sizing, or factory fitment constraints that make 19-inch and larger diameters unsuitable or sub-optimal. By concentrating all engineering and tooling on one diameter, Apex optimises spoke geometry, rim-wall thickness, and caliper clearance data for that specific application set rather than compromising for a wider size range.
FL-5 Construction: Flow-Forming for Thin Walls and Low Rolling Mass
The FL-5 barrel is produced via the spin-forming process, in which a cast aluminium blank is placed over a mandrel and shaped under heat and high roller pressure. This elongates and aligns the grain structure circumferentially through the barrel wall, increasing tensile strength and fatigue resistance without adding material thickness. The five-spoke face is machined from the cast portion of the blank to maintain precise spoke symmetry and hub-centric concentricity. The resulting wheel is lighter than a comparable cast design and stiffer under cornering loads where the barrel experiences the highest bending moment.
FL-5 Fitment and Offset Range
The FL-5 is offered in a range of widths and offsets within its 18-inch diameter, designed to cover the front and rear fitment requirements of BMW E-chassis sedans, coupes, and their M-series derivatives. Apex publishes a fitment guide for the FL-5 that includes confirmed clearance data for OEM and ES Brake Kit caliper assemblies, eliminating guesswork for owners specifying the wheel for a modified or lowered vehicle.
FL-5 Finishes
Available in Satin Black, Anthracite, and Brushed Clear. The brushed clear variant preserves raw aluminium texture under a protective clear layer; the satin black and anthracite options offer lower-reflectance appearance suited to aggressive or understated build aesthetics.
FL-5 Positioning in the Evolution Line
Within the Evolution Line, the FL-5 sits alongside the multi-diameter VS-5 and SM-10 as the focused single-size option. Owners seeking 19-inch or 20-inch fitment should reference the VS-5; those requiring a ten-spoke mesh face should reference the SM-10. The FL-5 exists for the specific case where 18 inches and a clean five-spoke face are both required simultaneously.
FL-5 Technical Overview
Five-spoke flow-formed construction. 18-inch diameter only. Multiple widths and offsets. BMW hub-centric bore. Satin Black, Anthracite, Brushed Clear finishes. JWL and VIA rated. Per-size published weights.
Any Vehicle, Any Specification
The FL-5 is available in configurations suited to a range of BMW and European vehicles within its 18-inch diameter. Contact Apex Wheels or an authorised dealer to confirm fitment, offset requirements, and finish availability for the FL-5 on your specific application.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Apex Wheels, operada por Aftermarket Performance Express Inc. y con sede en Pleasanton, California, fue fundada con una misión específica: diseñar llantas ligeras y aptas para pista, optimizadas para plataformas BMW y vehículos de rendimiento europeos. Este enfoque ha moldeado cada aspecto del desarrollo de productos de la marca, desde la geometría de radios elegida para despejar las envolventes de las pinzas de freno específicas de los BMW serie M y Sport, hasta los perfiles de offset que llenan las holguras de los arcos en vehículos europeos rebajados sin necesitar espaciadores. El resultado es una marca de llantas que la comunidad de plataformas europeas confía no como un compromiso, sino como una solución diseñada a propósito.
Hodoor adquiere las llantas Apex Wheels a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad