Apex Wheels SM-10 is a flow-formed Evolution Line wheel offered in 17 to 19 inches and 3 finishes. A multi-spoke performance design engineered for BMW and European platforms.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Anthracite
Race Silver
Satin Black
05 /Especificaciones completas
Apex Wheels SM-10 — Ten-Spoke Mesh Flow-Formed Wheel for BMW and European Platforms
Evolution Line Multi-Spoke: The SM-10 Delivers Open-Face Mesh Styling at Flow-Formed Weight
The Apex SM-10 is a ten-spoke, flow-formed aluminium wheel from the Apex Evolution Line. Where most flow-formed wheels favour three-, five-, or seven-spoke designs, the SM-10 adopts a dense ten-spoke mesh pattern that fills the face with shadow and depth. It was designed for BMW and European platform owners who want the visual complexity of a multi-spoke forged wheel but require a price point and rim-availability that only flow-formed production can provide.
SM-10 Construction: Spin-Formed Barrel, Precision-Machined Ten-Spoke Face
Like every Evolution Line wheel, the SM-10 begins as a low-pressure cast aluminium blank. The barrel section is then spin-formed over a heated mandrel, which cold-works the rim wall and elevates its tensile properties toward the lower end of the forged specification range. The ten-spoke face is machined after forming to achieve spoke width uniformity within tight tolerances — a requirement for a ten-spoke design where any visual irregularity across the face is immediately apparent. Each spoke tapers from a wide root at the hub flange to a narrower tip at the rim shelf, maintaining stiffness where it matters while shedding mass toward the outer circumference.
SM-10 Sizing and Platform Coverage
Apex offers the SM-10 in 18-inch, 19-inch, and 20-inch diameters to cover a broad range of BMW E-series, F-series, and G-series chassis. The 20-inch option extends the SM-10's reach into larger-displacement M-series and 5 Series GT applications where OEM diameters already sit at 19 or 20 inches. All sizes ship with hub-centric bore and confirmed caliper clearance data for OEM and common aftermarket brake upgrades.
SM-10 Finish Selection
The SM-10 is available in Satin Black, Anthracite, and Hyper Silver finishes. The hyper silver option uses a machine-cut face that reveals raw grain across each spoke face, contrasting with the deeper barrel shadow created by the ten-spoke density. Satin black provides a stealth appearance for builds seeking to minimise visual mass at the wheel.
SM-10 Application: Street Builds and Occasional Track Use
The SM-10 is positioned as a street-primary wheel with track compatibility for occasional lapping sessions. Drivers planning sustained circuit use at reduced weight should consider the SM-10RS Sprint Line forged variant, which provides greater stiffness and a reduced rotating mass figure suited to repeated hard braking and cornering cycles.
SM-10 Technical Summary
Ten-spoke flow-formed construction. Available in 18, 19, and 20 inches. BMW hub-centric bore. Satin Black, Anthracite, and Hyper Silver finishes. JWL and VIA structural compliance. Published per-size weight data.
Any Vehicle, Any Specification
The SM-10 is available in configurations to suit a wide range of vehicles and fitment requirements. Contact Apex Wheels or an authorised distributor for chassis-specific sizing, finish availability, and current lead times for your application.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Apex Wheels, operada por Aftermarket Performance Express Inc. y con sede en Pleasanton, California, fue fundada con una misión específica: diseñar llantas ligeras y aptas para pista, optimizadas para plataformas BMW y vehículos de rendimiento europeos. Este enfoque ha moldeado cada aspecto del desarrollo de productos de la marca, desde la geometría de radios elegida para despejar las envolventes de las pinzas de freno específicas de los BMW serie M y Sport, hasta los perfiles de offset que llenan las holguras de los arcos en vehículos europeos rebajados sin necesitar espaciadores. El resultado es una marca de llantas que la comunidad de plataformas europeas confía no como un compromiso, sino como una solución diseñada a propósito.
Hodoor adquiere las llantas Apex Wheels a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad