Apex Wheels ML-7RT is a forged Touring Line monoblock wheel with a seven-spoke design. 10,000-ton forged 6061-T6, 5-lug, 18 to 20 inches, 3 finishes, for Porsche, BMW, Audi, and European performance GT platforms.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Anthracite
Race Silver
Gunmetal Gray
05 /Especificaciones completas
Apex Wheels ML-7RT — Seven-Spoke 10,000-Ton Forged Touring Line Wheel
Touring Line Precision: Seven Forged Spokes Engineered for Porsche, BMW, and Audi GT Applications
The Apex ML-7RT is a seven-spoke, monoblock forged wheel from the Apex Touring Line. It occupies the gap between the aggressive eight- and ten-spoke Touring models and the multi-spoke mesh designs — seven evenly distributed spokes produce a face composition that photographs as open and airy while delivering the structural properties Apex requires from its forged catalogue. The ML-7RT targets Porsche 718, 911, BMW M-series, and Audi S/RS owners who want a forged upgrade at a diameter range their chassis actually uses.
ML-7RT Manufacture: 10,000-Ton Press, 6061-T6 Aluminium Billet
Apex forges the ML-7RT under 10,000 tons of press pressure from a 6061-T6 aluminium billet, crushing the material to close internal porosity and develop a continuous, directional grain structure that runs through every spoke from hub to rim. After pressing, the blank is heat-treated to T6 temper to maximise precipitation hardening before the face, spoke surfaces, and hub area are CNC-machined to final geometry. The seven-spoke layout provides one fewer load path than the ML-10RT's ten-spoke design but achieves comparable barrel rigidity by allowing each spoke to carry a wider cross-section — a trade Apex makes intentionally for the lighter platforms the ML-7RT primarily targets.
ML-7RT Specification Range
Offered in 18-inch, 19-inch, and 20-inch diameters with five-lug bolt circle options. Apex publishes fitment data specific to Porsche 718 Cayman and Boxster, 911 (991/992), BMW M2, M3, M4, and Audi B9 S4/RS4 caliper clearance. Each diameter is available in a range of widths and offsets to cover OEM-width and +10mm track-width configurations without spacers.
ML-7RT Surface Treatment
Matte Gunmetal, Gloss Graphite, and Brushed Titanium. The forged face takes machine-cut finishing differently from a cast surface — the denser grain structure produces a more uniform brush direction and a smoother milled edge, which is visible in the brushed titanium finish as a tighter linear texture than comparable cast brushed wheels.
ML-7RT Structural Specification
Load rating and deflection data published per size. The ML-7RT meets Touring Line structural requirements, which exceed the Evolution Line flow-formed specification for sustained lateral load — appropriate for the high-output Porsche and BMW M platforms it primarily serves. For drivers requiring the maximum Apex load rating at a five-spoke configuration, the VS-5RX Touring Line is the closest alternative.
ML-7RT Technical Summary
Seven-spoke 10,000-ton forged monoblock. 6061-T6 aluminium. 18, 19, 20-inch diameters. Five-lug options. Matte Gunmetal, Gloss Graphite, Brushed Titanium. Published load and deflection data per size.
Any Vehicle, Any Specification
The ML-7RT is available across a wide range of Porsche, BMW, and Audi configurations within its Touring Line specification. Contact Apex Wheels or an authorised distributor to confirm fitment, finish, and availability for the ML-7RT on your specific vehicle.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Apex Wheels, operada por Aftermarket Performance Express Inc. y con sede en Pleasanton, California, fue fundada con una misión específica: diseñar llantas ligeras y aptas para pista, optimizadas para plataformas BMW y vehículos de rendimiento europeos. Este enfoque ha moldeado cada aspecto del desarrollo de productos de la marca, desde la geometría de radios elegida para despejar las envolventes de las pinzas de freno específicas de los BMW serie M y Sport, hasta los perfiles de offset que llenan las holguras de los arcos en vehículos europeos rebajados sin necesitar espaciadores. El resultado es una marca de llantas que la comunidad de plataformas europeas confía no como un compromiso, sino como una solución diseñada a propósito.
Hodoor adquiere las llantas Apex Wheels a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad