BBS

BBS CH

En stock
Construcción
Monobloque Flow forming
Diámetros
17″ - 20″ + a medida
Anchos
7,5″ - 9,5″ + a medida
Rango de ET
Bajo petición

The BBS CH is a flow-formed split-spoke wheel with a motorsport-derived design and a replaceable stainless-steel rim protector. Back-milled spokes, counter-pressure cast, weight-optimised by FEM analysis. Original BBS design. Available at Hodoor Wheels.

  • Envío mundial en 5-7 días
  • Soporte de certificación
  • Comprobación de encaje gratuita

Acabados

Precio final, comprobación de encaje y estimación de entrega en 24 h.


¿Prefieres mensajería?EmailWhatsAppTelegram

03 /Especificaciones

Ficha técnica

Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.

01 / General

Construcción
Monobloque Flow forming
Material
High-grade aluminium alloy
Fabricación
Aluminio mecanizado por CNC
Origen
Japón
Acabado
Acabados estándar y a medida

02 / Encajes disponibles

Diámetros
17″ - 20″ + a medida
Anchos
7,5″ - 9,5″ + a medida
Patrón de tornillos (PCD)
Según vehículo / bajo petición
ET
Bajo petición
Centro de buje (CB)
Según vehículo

03 / Confirmado con el presupuesto

Holgura de frenos
Comprobado manualmente
Necesidad de separadores
Comprobado manualmente
Índice de carga
Confirmado para la medida elegida
Peso
Confirmado para la medida elegida

¿Necesitas medidas exactas para tu coche?

Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado

Elige tuacabado

Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.

  • Negro satinado

  • Negro brillante

  • Gunmetal mate

  • Gunmetal brillante

  • Plata satinada

  • Bronce satinado

  • Antracita

Acabado a medida disponible

¿Buscas un color concretoo un degradado cepillado?

Podemos igualar el acabado a tu proyecto e incluirlo en el presupuesto.

05 /Especificaciones completas

Descripción

BBS CH - The Flow-Formed Split-Spoke Wheel That Started It All

The Original Split-Spoke Design

Some wheels follow a trend. The BBS CH set one. Its split-spoke geometry - long, angled spokes that create a sense of motion even when the car is stationary - became a reference point for an entire generation of performance wheels. The design is clean, purposeful, and instantly recognisable, which is why it remains one of the most requested shapes in the BBS catalogue.

Where Flow-Forming Meets Counter-Pressure Casting

The CH is produced using BBS's counter-pressure casting process, followed by flow-forming of the rim area. This is the same technology the brand introduced to the aftermarket in 1996 and has refined over decades of motorsport and OEM supply. During flow-forming, the cast blank is heated and rolled under high pressure, compacting the material and aligning its grain structure. This increases strength and stiffness while reducing weight, and it allows the CH to achieve a stiffness-to-weight ratio that a conventional cast wheel cannot approach. The wheel is also weight-optimised through FEM analysis, ensuring that material is placed where it is needed and removed where it is not. BBS develops this geometry in-house, and no replica producer has access to the tooling or the thermal treatment process.

The CH Design

The CH's defining feature is its long, angled split-spoke pattern - a design that has become a reference point for enthusiasts because it looks equally correct on a Volkswagen Golf R and a Porsche Cayenne. The spokes are back-milled to remove unnecessary material, and the wheel includes a replaceable stainless-steel rim protector - a detail that protects the rim edge from kerb damage. The face is visually dynamic, but the flow-formed barrel ensures that the density does not come at the cost of performance. It is a wheel that reads as motorsport-derived without looking overstated.

For Cars That Demand Proven Engineering

The BBS CH suits owners of Volkswagen Golf R, Audi S4, and Porsche Cayenne - cars where the wheel must perform under load and look correct at every viewing distance. Tell us which car you are building for, and we will confirm the CH specification before the order is signed off.

BBS CH - Any Vehicle, Any Specification

BBS CH is available in diameters from 17- to 20-inch and widths from 7.5 to 9.5 inches, covering a broad range of platforms from hot hatches to full-size SUVs. The CH is particularly suited to Volkswagen Golf R, Audi S4, Porsche Cayenne, and BMW 3 Series builds where the motorsport-derived split-spoke geometry reads as both technically correct and visually dynamic. The replaceable stainless-steel rim protector makes the CH a practical daily-driver choice as well as a weekend performance option. Custom offsets and a full range of PCD configurations are available through our fitment consultation programme. Contact Hodoor Wheels for a fitment consultation and pricing.

06 /Certificación

Soporte de certificación

La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.

  • 01

    Claridad sobre lo que recibes

    Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.

  • 02

    Documentos verificados antes del pago

    Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.

  • 03

    Encaje verificado

    Offset, PCD y holgura de frenos comprobados para tu auto.

  • 04

    Matriculación en tu país

    Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

BBS

Sobre BBS

BBS es el pionero original de la llanta de alto rendimiento: fundada en 1970 en Schiltach, Alemania, con BBS Japan establecida en 1983. La marca construyó su reputación sobre una única convicción: que la ingeniería de competición debe llegar a la carretera, no permanecer encerrada en el paddock. Esa convicción se materializa con máxima claridad en la tecnología BBS Flow Forming, el proceso que define la Performance Line de la marca y lleva la ingeniería derivada de las carreras a una amplia gama de vehículos de lujo y de alto rendimiento.

Hodoor adquiere las llantas BBS a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Ver todas las llantas BBS

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad