BBS

BBS CH-R

En stock
Construcción
Monobloque Flow forming
Diámetros
18″ - 20″ + a medida
Anchos
8,5″ - 9,5″ + a medida
Rango de ET
Bajo petición

The BBS CH-R is a flow-formed split-spoke wheel with a motorsport-derived design and a replaceable stainless-steel rim protector. Back-milled spokes, counter-pressure cast, weight optimised. Original BBS design. Available at Hodoor Wheels.

  • Envío mundial en 5-7 días
  • Soporte de certificación
  • Comprobación de encaje gratuita

Acabados

Precio final, comprobación de encaje y estimación de entrega en 24 h.


¿Prefieres mensajería?EmailWhatsAppTelegram

03 /Especificaciones

Ficha técnica

Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.

01 / General

Construcción
Monobloque Flow forming
Material
High-grade aluminium alloy
Fabricación
Aluminio mecanizado por CNC
Origen
Japón
Acabado
Acabados estándar y a medida

02 / Encajes disponibles

Diámetros
18″ - 20″ + a medida
Anchos
8,5″ - 9,5″ + a medida
Patrón de tornillos (PCD)
Según vehículo / bajo petición
ET
Bajo petición
Centro de buje (CB)
Según vehículo

03 / Confirmado con el presupuesto

Holgura de frenos
Comprobado manualmente
Necesidad de separadores
Comprobado manualmente
Índice de carga
Confirmado para la medida elegida
Peso
Confirmado para la medida elegida

¿Necesitas medidas exactas para tu coche?

Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado

Elige tuacabado

Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.

  • Brilliant silver

  • Satin Black

  • Satin Titanium

  • Nürburgring Edition

Acabado a medida disponible

¿Buscas un color concretoo un degradado cepillado?

Podemos igualar el acabado a tu proyecto e incluirlo en el presupuesto.

05 /Especificaciones completas

Descripción

BBS CH-R - The Flow-Formed Split-Spoke Wheel With a Motorsport Pedigree

The Split-Spoke Face That Reads as Motorsport

The BBS CH-R was not designed to be subtle. Its split-spoke geometry is a direct reference to the wheels BBS developed for GT racing - long, angled spokes that give the face a sense of motion even when the car is stationary. It is a design that announces its intent before the car moves, and it has become one of the most recognisable shapes in the BBS catalogue because of it.

Where Flow-Forming Meets Casting

The CH-R is produced using BBS's counter-pressure casting process, followed by flow-forming of the rim area - the same technology the brand introduced to the aftermarket in 1996 and has refined over decades of motorsport and OEM supply. During flow-forming, the cast blank is heated and rolled under high pressure, compacting the material and aligning its grain structure. This increases strength and stiffness while reducing weight, and it allows the CH-R to achieve a stiffness-to-weight ratio that a conventional cast wheel cannot approach. BBS develops this geometry in-house, and no replica producer has access to the tooling or the thermal treatment process.

The CH-R Design

The CH-R's defining feature is its long, angled split-spoke pattern - a design that has become a reference point for enthusiasts because it looks equally correct on a Volkswagen Golf R and a Porsche Cayenne. The spokes are back-milled to remove unnecessary material, and the wheel includes a replaceable stainless-steel rim protector - a detail that protects the rim edge from kerb damage. The face is visually dynamic, but the flow-formed barrel ensures that the density does not come at the cost of performance. It is a wheel that reads as motorsport-derived without looking overstated.

For Cars That Demand Motorsport-Derived Engineering

The BBS CH-R suits owners of Volkswagen Golf R, Audi S4, and Porsche Cayenne - cars where the wheel must perform under load and look correct at every viewing distance. Tell us which car you are building for, and we will confirm the CH-R specification before the order is signed off.

BBS CH-R - Any Vehicle, Any Specification

BBS CH-R is available in diameters from 18 to 20 inches and widths from 8.5 to 9.5 inches, covering a broad range of platforms from the Volkswagen Golf R and Audi S3 to the Porsche Macan and SEAT Leon Cupra. Custom offsets are available through the BBS fitment programme, allowing the CH-R to be specified for vehicles where standard ET ranges do not apply. Contact Hodoor Wheels for a fitment consultation and pricing.

06 /Certificación

Soporte de certificación

La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.

  • 01

    Claridad sobre lo que recibes

    Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.

  • 02

    Documentos verificados antes del pago

    Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.

  • 03

    Encaje verificado

    Offset, PCD y holgura de frenos comprobados para tu auto.

  • 04

    Matriculación en tu país

    Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

BBS

Sobre BBS

BBS es el pionero original de la llanta de alto rendimiento: fundada en 1970 en Schiltach, Alemania, con BBS Japan establecida en 1983. La marca construyó su reputación sobre una única convicción: que la ingeniería de competición debe llegar a la carretera, no permanecer encerrada en el paddock. Esa convicción se materializa con máxima claridad en la tecnología BBS Flow Forming, el proceso que define la Performance Line de la marca y lleva la ingeniería derivada de las carreras a una amplia gama de vehículos de lujo y de alto rendimiento.

Hodoor adquiere las llantas BBS a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Ver todas las llantas BBS

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad