The BBS FI-R is a flow-formed monoblock wheel with five split spokes and motorsport-derived weight-saving holes. Back-milled spokes, 6000-series aluminium, weight from 7.7 kg. Original BBS design. Available at Hodoor Wheels.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Negro satinado
Negro brillante
Gunmetal mate
Gunmetal brillante
Plata satinada
Bronce satinado
Antracita
05 /Especificaciones completas
BBS FI-R - The Flow-Formed Monoblock With Motorsport-Derived Split Spokes
The Wheel That Motorsport Built for the Road
Some wheels are designed for a single platform. The BBS FI-R was designed for a purpose - to bring motorsport-derived engineering to road-going performance cars. Its five split spokes are not a stylistic choice; they are a direct reference to the wheels BBS developed for racing, where reducing unsprung mass and maintaining brake cooling are the only metrics that matter. The FI-R is the road-going expression of that idea, and it has become a reference point for Porsche owners because of it.
Where Flow-Forming Meets Motorsport Heritage
The FI-R sits within the BBS Forged Line - the brand's flagship platform, produced at BBS Japan using a multi-stage flow-forming process. Each wheel begins as a billet of 6000-series aerospace-grade aluminium, which is heated and flow-formed under extreme pressure to create a dense, fine-grained metal structure. The FI-R is then back-milled to remove material from the spokes that is not required for strength, reducing weight without compromising structural integrity. The result is a one-piece wheel that weighs as little as 7.7 kg in its lightest configuration, yet delivers the stiffness-to-weight ratio that a performance car demands. BBS develops this geometry in-house, and no replica producer has access to the tooling or the thermal treatment process.
The FI-R Design
The FI-R's defining feature is its five split-spoke pattern - a design that has become instantly recognisable because it looks equally correct on a Porsche 911 GT3 and a BMW M4. Each spoke features a hole at its outer edge to reduce weight further, a detail that is visible on close inspection and that reflects the FI-R's motorsport origins. The design is deliberately aggressive without being overstated, and it reads as purposeful from every angle. It is a wheel that suits performance cars where the wheel is expected to make a statement - a Porsche 911, a BMW M4, or an Audi R8.
For Performance Cars That Demand Motorsport-Derived Engineering
The BBS FI-R suits owners of Porsche 911 (991/992), BMW M4 (F82/G82), and Audi R8 - cars where the wheel must perform under load and look correct at every viewing distance. Tell us which car you are building for, and we will confirm the FI-R specification before the order is signed off.
BBS FI-R - Any Vehicle, Any Specification
BBS FI-R is available in diameters from 19- to 21-inch and widths from 8.5 to 12.5 inches, with fitment programs covering Porsche 911 (991/992 Carrera, GT3, Turbo), BMW M4 (F82/G82), and Audi R8 (4S). The extended width range supports staggered setups and wide-body builds, while the custom offset program accommodates GT3-specification track configurations. Every specification is validated against the platform before production begins. Contact Hodoor Wheels for a fitment consultation and pricing.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

BBS es el pionero original de la llanta de alto rendimiento: fundada en 1970 en Schiltach, Alemania, con BBS Japan establecida en 1983. La marca construyó su reputación sobre una única convicción: que la ingeniería de competición debe llegar a la carretera, no permanecer encerrada en el paddock. Esa convicción se materializa con máxima claridad en la tecnología BBS Flow Forming, el proceso que define la Performance Line de la marca y lleva la ingeniería derivada de las carreras a una amplia gama de vehículos de lujo y de alto rendimiento.
Hodoor adquiere las llantas BBS a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad