The BBS RG-F is a flow-formed monoblock wheel with ten cross spokes, designed for lightweight sports cars. Back-milled spokes, 6000-series aluminium, weight from 4.2 kg. Original BBS design. Available at Hodoor Wheels.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Negro satinado
Negro brillante
Gunmetal mate
Gunmetal brillante
Plata satinada
Bronce satinado
Antracita
05 /Especificaciones completas
BBS RG-F - The Flow-Formed Monoblock Built for Lightweight Sports Cars
The Cross-Spoke Face That Weighs Almost Nothing
Lightweight sports cars do not need heavy wheels. They need wheels that disappear beneath the car and let the chassis do the talking. The BBS RG-F was designed around exactly that brief: a ten cross-spoke face that reads as purposeful without overwhelming the vehicle, and a weight that starts at just 4.2 kg. It is the wheel that BBS recommends for cars like the Honda Civic Type R and the Mazda MX-5, and it has remained in the catalogue because it was resolved correctly the first time.
Where Flow-Forming Meets Lightweight Construction
The RG-F sits within the BBS Forged Line - the brand's flagship platform, produced at BBS Japan using a multi-stage flow-forming process. Each wheel begins as a billet of 6000-series aluminium, which is heated and flow-formed under extreme pressure to create a dense, fine-grained metal structure. The RG-F is then back-milled to remove material that is not required for strength, reducing weight without compromising structural integrity. The result is a one-piece wheel that weighs as little as 4.2 kg in its lightest configuration - a figure that directly improves acceleration, braking, and steering response. BBS develops this geometry in-house, and no replica producer has access to the tooling.
The RG-F Design
The RG-F's defining feature is its ten cross-spoke pattern - a design that reflects the brand's racing heritage while remaining appropriate for the road. The spokes are arranged to create a sense of motion even when the wheel is stationary, and the face is visually open without being busy. It is a design that suits compact sports cars where the wheel is expected to perform without drawing attention to itself - a Honda Civic Type R (FK8), a Mazda MX-5 (ND), or a Toyota 86. The wheel is available in Silver, Blue Black diamond-cut, Diamond Black, and Gold finishes, allowing it to be specified to the character of the vehicle.
For Lightweight Sports Cars That Reward Minimal Mass
The BBS RG-F suits owners of Honda Civic Type R (FK8), Mazda MX-5 (ND), and Toyota 86 - cars where reducing unsprung mass has a direct effect on handling and driver engagement. Every specification is validated against the platform before production begins. Reach us to begin your fitment review.
BBS RG-F - Any Vehicle, Any Specification
BBS RG-F is available in diameters from 15- to 16-inch and widths from 5.5 to 7 inches, with fitment programs covering Honda Civic Type R (EK9/EP3/FK8), Mazda MX-5 (NA/NB/ND), Toyota 86 and GR86, and Subaru BRZ. Starting at 4.2 kg, the RG-F is among the lightest flow-formed wheels in the BBS catalogue - a specification that delivers measurable improvements in acceleration, braking, and steering feel on lightweight sports platforms. Custom offsets are available on request. Contact Hodoor Wheels for a fitment consultation and pricing.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

BBS es el pionero original de la llanta de alto rendimiento: fundada en 1970 en Schiltach, Alemania, con BBS Japan establecida en 1983. La marca construyó su reputación sobre una única convicción: que la ingeniería de competición debe llegar a la carretera, no permanecer encerrada en el paddock. Esa convicción se materializa con máxima claridad en la tecnología BBS Flow Forming, el proceso que define la Performance Line de la marca y lleva la ingeniería derivada de las carreras a una amplia gama de vehículos de lujo y de alto rendimiento.
Hodoor adquiere las llantas BBS a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad