BBS

BBS SR

En stock
Construcción
Monobloque Flow forming
Diámetros
17″ - 18″ + a medida
Anchos
7,5″ - 9″ + a medida
Rango de ET
Bajo petición

The BBS SR is a flow-formed monoblock wheel with spokes that continue through to the hub bore for a larger visual appearance. Counter-pressure cast, flow-formed rim, easy-clean design. Original BBS design. Available at Hodoor Wheels.

  • Envío mundial en 5-7 días
  • Soporte de certificación
  • Comprobación de encaje gratuita

Acabados

Precio final, comprobación de encaje y estimación de entrega en 24 h.


¿Prefieres mensajería?EmailWhatsAppTelegram

03 /Especificaciones

Ficha técnica

Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.

01 / General

Construcción
Monobloque Flow forming
Material
High-grade aluminium alloy
Fabricación
Aluminio mecanizado por CNC
Origen
Japón
Acabado
Acabados estándar y a medida

02 / Encajes disponibles

Diámetros
17″ - 18″ + a medida
Anchos
7,5″ - 9″ + a medida
Patrón de tornillos (PCD)
Según vehículo / bajo petición
ET
Bajo petición
Centro de buje (CB)
Según vehículo

03 / Confirmado con el presupuesto

Holgura de frenos
Comprobado manualmente
Necesidad de separadores
Comprobado manualmente
Índice de carga
Confirmado para la medida elegida
Peso
Confirmado para la medida elegida

¿Necesitas medidas exactas para tu coche?

Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado

Elige tuacabado

Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.

  • Himalaya Satin Grey

  • Volcano Grey Diamond-Cut

Acabado a medida disponible

¿Buscas un color concretoo un degradado cepillado?

Podemos igualar el acabado a tu proyecto e incluirlo en el presupuesto.

05 /Especificaciones completas

Descripción

BBS SR - The Flow-Formed Monoblock With Spokes That Reach the Hub Bore

The Design Detail That Makes It Look Bigger

Most wheels stop their spokes at the edge of the centre cap. The BBS SR does something different: its spokes continue all the way through to the hub bore, a design decision that makes the wheel appear larger than its actual diameter. It is a small detail with a significant visual effect, and it has become one of the most recognisable signatures in the BBS catalogue because of it.

Where Flow-Forming Meets Counter-Pressure Casting

The SR is produced using BBS's counter-pressure casting process, followed by flow-forming of the inner rim area. This is the same technology the brand introduced to the aftermarket in 1996 and has refined over decades of motorsport and OEM supply. During flow-forming, the cast blank is rotated under tremendous pressure at high temperature, and three hydraulic rollers form the inner rim area, compacting the material and aligning its grain structure. This process changes the mechanical properties of the cast rim, increasing strength and stiffness while reducing weight. The result is a wheel that delivers a stiffness-to-weight ratio far beyond what a conventional casting can achieve, at a cost that remains accessible. BBS develops this geometry in-house, and no replica producer has access to the tooling.

The SR Design

The SR's defining feature is its multi-spoke pattern with soft radii and contours that run from the hub to the flange. Those soft transitions make the wheel easy to clean, which is especially practical during winter months. The spokes that continue through to the hub bore create a visual effect that makes the wheel seem larger than it is, and the diamond-cut finish option adds a layer of contrast that becomes visible on close inspection. It is a design that suits a wide range of vehicles - from a Volkswagen Golf to an Audi A4 - without looking borrowed from a sports car. It reads as sporty and stylish, but never overstated.

For Drivers Who Want BBS Engineering Without the Flagship Price

The BBS SR suits owners of Volkswagen Golf, Audi A4, and BMW 3 Series - cars where the wheel must perform under load and look correct at every viewing distance. Tell us which car you are building for, and we will confirm the SR specification before the order is signed off.

BBS SR - Any Vehicle, Any Specification

BBS SR is available in 17- to 18-inch diameters with widths from 7.5 to 9 inches, designed to fit a wide range of European compact and executive vehicles without requiring custom offset work in most cases. The hub-bore spoke design and easy-clean profile make it a practical everyday choice for Volkswagen Golf, Audi A4, BMW 3 Series, and Skoda Octavia RS - vehicles where BBS build quality is expected but the specification does not need to be track-focused. Available in Himalaya Satin Grey and Volcano Grey Diamond-Cut finishes to complement a range of body colours, with custom offsets available on request. Contact Hodoor Wheels for a fitment consultation and pricing.

06 /Certificación

Soporte de certificación

La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.

  • 01

    Claridad sobre lo que recibes

    Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.

  • 02

    Documentos verificados antes del pago

    Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.

  • 03

    Encaje verificado

    Offset, PCD y holgura de frenos comprobados para tu auto.

  • 04

    Matriculación en tu país

    Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

BBS

Sobre BBS

BBS es el pionero original de la llanta de alto rendimiento: fundada en 1970 en Schiltach, Alemania, con BBS Japan establecida en 1983. La marca construyó su reputación sobre una única convicción: que la ingeniería de competición debe llegar a la carretera, no permanecer encerrada en el paddock. Esa convicción se materializa con máxima claridad en la tecnología BBS Flow Forming, el proceso que define la Performance Line de la marca y lleva la ingeniería derivada de las carreras a una amplia gama de vehículos de lujo y de alto rendimiento.

Hodoor adquiere las llantas BBS a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Ver todas las llantas BBS

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad