The BBS Super RS is a flow-formed two-piece wheel with seventeen cross spokes. Unchanged since 1983, it remains one of the most recognisable designs in the BBS catalogue. Made in Japan with exposed stainless hardware. Original BBS design. Available at Hodoor Wheels.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Negro satinado
Negro brillante
Gunmetal mate
Gunmetal brillante
Plata satinada
Bronce satinado
Antracita
05 /Especificaciones completas
BBS Super RS - The Flow-Formed Two-Piece Wheel That Defined a Generation
The Design That Never Needed a Revision
Some wheel designs arrive and disappear within a few seasons. The BBS Super RS arrived in 1983 and has never left. Its seventeen cross spokes and luxurious styling have remained unchanged for over forty years - not because BBS stopped innovating, but because the design was resolved correctly the first time. It is a wheel that has become a reference point for enthusiasts around the world, and it remains in continuous production because it works on almost anything it is fitted to.
Where Flow-Forming Meets Two-Piece Construction
The Super RS is produced by BBS Japan using a combination of technologies that reflects the brand's motorsport heritage. The centre face begins as a high-quality aluminium blank, which is heated and flow-formed under extreme pressure to create a dense, fine-grained metal structure. The outer barrel is flow-formed separately, and the two components are then joined using exposed stainless hardware - a construction that allows for precise assembly and, uniquely for this category, the ability to replace the outer rim if it is damaged. This is a wheel built to be serviced, not simply replaced. BBS develops this geometry in-house, and no replica producer has access to the tooling.
Why Flow-Forming Matters on the Super RS
Flow-forming is not a marketing term - it is a metallurgical process. By spinning the aluminium blank against hydraulic rollers at high temperature, BBS compacts the material and aligns its grain structure, producing a wheel that is both lighter and stronger than a conventional cast alternative. On the Super RS, this translates into a wheel that weighs approximately 10.7 kg in its lightest configuration, while delivering the structural integrity that a two-piece construction demands. The two-piece design also allows for a wider range of offsets and lip depths than a one-piece wheel, which is why it remains a favourite for everything from Toyota Supras to Porsche 911s.
For Drivers Who Value Proven Design
The BBS Super RS suits owners of Toyota Supra, Porsche 911, and Mercedes-Benz SL - cars where the wheel must be both visually correct and technically capable. Every specification is validated against the individual vehicle before production begins. Tell us which car you are building for, and we will confirm the Super RS specification before the order is signed off.
BBS SUPER-RS - Any Vehicle, Any Specification
BBS SUPER-RS is available in diameters from 19- to 20-inch and widths from 8.5 to 10 inches, with the two-piece construction allowing a wider range of custom offsets and stepped lip depths than a monoblock alternative. The SUPER-RS is particularly suited to Toyota Supra, Porsche 911, Mercedes-Benz SL, and BMW 3 Series builds where the period-correct styling of the cross-spoke design is part of the brief. The replaceable outer barrel also makes it a practical choice for vehicles driven on varied roads. Custom offsets and multiple finish options are available through our fitment consultation programme. Contact Hodoor Wheels for a fitment consultation and pricing.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

BBS es el pionero original de la llanta de alto rendimiento: fundada en 1970 en Schiltach, Alemania, con BBS Japan establecida en 1983. La marca construyó su reputación sobre una única convicción: que la ingeniería de competición debe llegar a la carretera, no permanecer encerrada en el paddock. Esa convicción se materializa con máxima claridad en la tecnología BBS Flow Forming, el proceso que define la Performance Line de la marca y lleva la ingeniería derivada de las carreras a una amplia gama de vehículos de lujo y de alto rendimiento.
Hodoor adquiere las llantas BBS a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad