The BBS SX is a flow-formed two-piece wheel with a counter-pressure cast centre and a flow-formed outer rim. Five split spokes, weight-optimised by FEM analysis. Original BBS design. Available at Hodoor Wheels.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Brilliant silver
Crystal Black
Platinum Silver Diamond-Cut
05 /Especificaciones completas
BBS SX - The Flow-Formed Two-Piece Wheel Built for Performance and Value
The Wheel That Brings Flow-Forming to a Wider Audience
Flow-forming is not just for flagship wheels. The BBS SX proves that. It is a two-piece wheel that combines a counter-pressure cast centre face with a flow-formed outer rim - a construction that delivers the strength and weight benefits of flow-forming at a price point that makes it accessible to a wider range of performance cars. It is the wheel that brings BBS engineering to the Golf R and the Audi A3, and it has become a reference point for enthusiasts because of it.
Where Flow-Forming Meets Counter-Pressure Casting
The SX is produced using BBS's counter-pressure casting process, followed by flow-forming of the outer rim. This is the same technology the brand introduced to the aftermarket in 1996 and has refined over decades of motorsport and OEM supply. During flow-forming, the cast blank is heated and rolled under high pressure, compacting the material and aligning its grain structure. This increases strength and stiffness while reducing weight, and it allows the SX to achieve a stiffness-to-weight ratio that a conventional cast wheel cannot approach. The wheel is also weight-optimised through FEM analysis, ensuring that material is placed where it is needed and removed where it is not. BBS develops this geometry in-house, and no replica producer has access to the tooling.
The SX Design
The SX's defining feature is its five split-spoke pattern - a design that has become a reference point for enthusiasts because it looks equally correct on a Volkswagen Golf R and an Audi A3. The spokes are arranged to create a sense of motion even when the wheel is stationary, and the face is visually balanced without being busy. It is a design that suits cars where the wheel is expected to perform without looking aftermarket - a Golf R, an A3, or a BMW 3 Series. The wheel is available in Brilliant Silver and Crystal Black finishes, allowing it to be specified to the character of the vehicle.
For Performance Cars That Want Flow-Forming Without the Flagship Price
The BBS SX suits owners of Volkswagen Golf R (Mk7/Mk8), Audi A3 (8V/8Y), and BMW 3 Series (F30/G20) - cars where the wheel must perform under load and look correct at every viewing distance. Every specification is validated against the platform before production begins. Reach us to begin your fitment review.
BBS SX - Any Vehicle, Any Specification
BBS SX is available in diameters from 17- to 20-inch and widths from 7.5 to 9 inches, with custom offset programs covering Volkswagen Golf R (Mk7/Mk8), Audi A3 (8V/8Y), BMW 3 Series (F30/G20), and similar compact performance platforms. The two-piece construction allows a wider offset range than a monoblock, making the SX a practical choice for lowered and track-prepared builds. Custom offsets are available on request. Contact Hodoor Wheels for a fitment consultation and pricing.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

BBS es el pionero original de la llanta de alto rendimiento: fundada en 1970 en Schiltach, Alemania, con BBS Japan establecida en 1983. La marca construyó su reputación sobre una única convicción: que la ingeniería de competición debe llegar a la carretera, no permanecer encerrada en el paddock. Esa convicción se materializa con máxima claridad en la tecnología BBS Flow Forming, el proceso que define la Performance Line de la marca y lleva la ingeniería derivada de las carreras a una amplia gama de vehículos de lujo y de alto rendimiento.
Hodoor adquiere las llantas BBS a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad