The Rotiform FUC CustomSpec is a forged monoblock wheel from the Rotiform CustomSpec made-to-order program. Available in 16 to 24 inch diameters, configured to any width, offset, bolt pattern, and finish per order.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Especificaciones completas
Rotiform FUC CustomSpec — Mesh-Pattern Face for Stance and Wide-Body Builds
Interlocking Spoke Grid, Forged as a Single Piece to Buyer Dimensions
Rotiform FUC CustomSpec adapts a dense mesh-pattern face into the CustomSpec one-piece forged program. Where most Rotiform monoblock designs use widely spaced individual spokes, the FUC interlaces a tighter grid of shorter spoke elements across the face — creating visual density and a woven texture that becomes its signature appearance. Each FUC is individually forged and machined to the buyer's chassis specification.
Rotiform FUC Design: Interlocked Mesh Grid with Deep Barrel
The FUC face comprises interconnected short spoke segments arranged in a crossing pattern, creating a mesh or lattice effect across the wheel face. The grid terminates at an outer hoop before transitioning to a deep, stepped barrel suited to aggressive stance offsets. Face-on, the interlocking pattern reads as a texture rather than individual spokes — it appears finer-grained and denser than conventional designs. In profile, the depth of the barrel dominates, particularly effective on wide-bodied platforms where the full side of the wheel is visible.
Rotiform FUC Engineering: One-Piece Forged Mesh Construction
Producing the FUC's mesh face in a single forging is a manufacturing challenge — the interconnected grid requires precise CNC milling to clear material between segments without leaving burrs or uneven surfaces. Each intersection point is machined to consistent height, maintaining the flat grid aesthetic across the full face. The forged substrate provides the density needed for the grid to function structurally under cornering loads.
FUC CustomSpec Specifications
Method: one-piece forged, CNC-milled. Material: high-density aluminum alloy. Dimensional specification — diameter, width, offset, bolt pattern — submitted by customer at order and held to drawing through fabrication. No floor stock held; fabrication begins after order confirmation.
FUC CustomSpec Finish Options
Surface treatments available for the FUC include Gloss Black, Anthracite, Brushed Silver, and two-tone Matte Black with Polished Lip. The mesh face in Brushed Silver shows maximum texture detail — each grid intersection catches light differently, creating a complex reflective pattern. Gloss Black flattens the texture for a monochromatic stance aesthetic.
FUC CustomSpec Build Examples
The FUC has been featured on Nissan GT-R and Honda NSX builds, where the mesh face complements the vehicles' performance body lines. Its deep barrel suits low, stretched fitments common in stance culture. Rotiform's CustomSpec team provides fitment data for any vehicle submitting order information.
Any Vehicle, Any Specification
The FUC CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Rotiform es una marca americana premium de llantas fundada en California en 2009, establecida como especialista en diseño de llantas monoblock multipiezas y personalizadas para el mercado del tuning de rendimiento y lujo. Desde diciembre de 2025, Rotiform forma parte de Blue Design Group, un holding que consolida marcas premium de llantas y diseño automotriz, aportando recursos adicionales de ingeniería y diseño al pipeline de desarrollo de Rotiform. La marca ha establecido una presencia en el motorsport a través de su papel como socio técnico de los equipos Ferrari Challenge y del programa GT, añadiendo credibilidad técnica que extiende la marca más allá de la escena del tuning callejero.
Hodoor adquiere las llantas Rotiform a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad