The Rotiform HUR CustomSpec is a forged monoblock wheel from the Rotiform CustomSpec made-to-order program. Available in 16 to 24 inch diameters, configured to any width, offset, bolt pattern, and finish per order.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Especificaciones completas
Rotiform HUR CustomSpec — Directional Concave Face, Forged to Exact Dimensions
One-Piece Forged Monoblock with Aggressive Swept-Spoke Character
Rotiform HUR CustomSpec centers on directional spoke geometry — spokes that sweep from hub to rim at a consistent rotational angle, generating visual motion even when stationary. This swept character distinguishes the HUR from symmetrical multi-spoke designs, giving it a dynamic appearance that suits sport sedans, coupes, and wide-body builds. Each HUR is machined to the customer's submitted dimensions.
Rotiform HUR Design: Swept Directional Spokes with Deep Concave Profile
Five or six spokes (depending on diameter) sweep from hub flange toward the outer hoop at a rotational offset angle. Each spoke tapers in width from hub to rim and descends into the barrel along a pronounced concave arc, creating depth that becomes especially visible in profile. The pockets between spokes are deep enough to expose the barrel at aggressive viewing angles without fully opening the face, maintaining visual mass while creating shadow and depth.
Rotiform HUR Engineering: One-Piece Forged Monoblock
Rotiform forges the HUR from a solid aluminum cylinder before CNC machining shapes the directional spokes, concave face, and outer hoop. The forging step establishes grain continuity from center to rim; subsequent machining removes excess material while preserving the dense forged substrate. The one-piece configuration means there are no spoke welds or barrel joints — structural integrity runs continuously from hub bore to lip.
HUR CustomSpec Technical Parameters
Method: one-piece forged monoblock. Material: 6061-T6 aluminum alloy. Dimensional parameters are submitted by the customer at order: diameter, width, offset, and bolt pattern. Rotiform confirms fitment and programs CNC toolpaths to those exact specifications. Lead time is quoted at order.
HUR CustomSpec Finish Selection
Surface options encompass Gloss Black, Matte Black, Brushed Gunmetal, Polished Silver, and Anthracite. The directional spoke geometry interacts distinctively with Polished Silver — light traces the sweep of each spoke in moving illumination. Matte Black and Anthracite reduce reflectivity for a stealth appearance on darker vehicle colors.
HUR CustomSpec Installation References
Documented builds include BMW 5 Series (F10), Audi S4, and Mercedes-Benz C63 AMG platforms, where the HUR's directional character complements the vehicles' performance orientation. The CustomSpec program accommodates any vehicle that fits the wheel's available diameter and offset range.
Any Vehicle, Any Specification
The HUR CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Rotiform es una marca americana premium de llantas fundada en California en 2009, establecida como especialista en diseño de llantas monoblock multipiezas y personalizadas para el mercado del tuning de rendimiento y lujo. Desde diciembre de 2025, Rotiform forma parte de Blue Design Group, un holding que consolida marcas premium de llantas y diseño automotriz, aportando recursos adicionales de ingeniería y diseño al pipeline de desarrollo de Rotiform. La marca ha establecido una presencia en el motorsport a través de su papel como socio técnico de los equipos Ferrari Challenge y del programa GT, añadiendo credibilidad técnica que extiende la marca más allá de la escena del tuning callejero.
Hodoor adquiere las llantas Rotiform a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad