The Rotiform HUR-T CustomSpec is a forged monoblock wheel from the Rotiform CustomSpec made-to-order program. Available in 16 to 24 inch diameters, configured to any width, offset, bolt pattern, and finish per order.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Especificaciones completas
Rotiform HUR-T CustomSpec — Twin-Beam Spoke Variant of the HUR Platform
Split-Spoke Architecture in a Billet-Forged Single-Piece Wheel
Rotiform HUR-T CustomSpec modifies the HUR's directional spoke language into a twin-beam format — each primary spoke splits into two parallel ribs separated by a narrow pocket, increasing visual detail per spoke without multiplying spoke count. The result is a face that reads more complex than the standard HUR while sharing the same fundamental directional sweep and concave geometry. All HUR-T wheels are individually machined to customer specification.
Rotiform HUR-T Design: Parallel-Rib Twin-Beam Spokes
Where the HUR uses solid single spokes, the HUR-T bifurcates each spoke into two parallel ribs running side by side from hub to hoop with a machined gap between them. This creates a window effect within each spoke that adds surface detail while keeping the structural cross-section comparable to the base design. The concave face depth, hoop profile, and overall diameter footprint remain consistent with HUR proportions, allowing the T variant to occupy a complementary position in a staggered fitment set.
Rotiform HUR-T Engineering: Billet-Forged, CNC-Finished
The HUR-T blank is forged from aluminum billet to establish grain density, then transferred to CNC milling where the twin-rib spoke pockets are machined. The pocket geometry between ribs is a CNC-only feature — it cannot be reproduced in a cast die — which is why the HUR-T is exclusively a forged product. Hub-bore and bolt-circle dimensions are milled to the customer's submitted vehicle data for direct hub-centric fitment.
HUR-T CustomSpec Specifications
Construction: billet-forged, CNC-milled monoblock. Alloy: 6061-T6 aluminum. Diameter, width, bolt pattern, and offset are specified by the customer at order. Rotiform fabricates each piece individually; no catalog sizes are held in stock.
HUR-T CustomSpec Finishes
Available coatings include Polished, Matte Gunmetal, Gloss Black, and Brushed Anthracite. The twin-rib spoke structure creates shadow lines between ribs that are accentuated in Polished and Brushed finishes, making the detail more legible at distance. Matte Gunmetal and Gloss Black flatten the rib contrast for a cohesive dark finish.
HUR-T CustomSpec on Platform
The HUR-T has been used on Audi RS5, BMW M4, and Lamborghini Huracán platforms, taking advantage of the wheel's ability to deliver high face complexity without excessive weight. Rotiform's CustomSpec team handles fitment data for any vehicle outside these reference examples.
Any Vehicle, Any Specification
The HUR-T CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Rotiform es una marca americana premium de llantas fundada en California en 2009, establecida como especialista en diseño de llantas monoblock multipiezas y personalizadas para el mercado del tuning de rendimiento y lujo. Desde diciembre de 2025, Rotiform forma parte de Blue Design Group, un holding que consolida marcas premium de llantas y diseño automotriz, aportando recursos adicionales de ingeniería y diseño al pipeline de desarrollo de Rotiform. La marca ha establecido una presencia en el motorsport a través de su papel como socio técnico de los equipos Ferrari Challenge y del programa GT, añadiendo credibilidad técnica que extiende la marca más allá de la escena del tuning callejero.
Hodoor adquiere las llantas Rotiform a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad