Rotiform PNT CustomSpec is a forged 3-piece wheel from the CustomSpec program, available in fully custom diameters, widths, and offsets. The PNT features a distinctive multi-spoke design with premium polished and brushed finish options, ideal for European and performance vehicles. Available in 18+ finishes.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Especificaciones completas
Rotiform PNT CustomSpec — Stepped-Lip Multi-Spoke in Brushed and Polished Finishes
Three-Piece Forged Construction with Prominent Stepped Barrel Lip
Rotiform PNT CustomSpec defines itself through two elements: a balanced multi-spoke face and a prominently stepped outer barrel lip. The step — a machined shelf at the transition from barrel to outer lip — adds a visual layering effect to the profile view, distinguishing the PNT from smooth-lip three-piece wheels. Combined with the brushed and polished surface options, the stepped lip gives the PNT a premium, hand-finished appearance. Each PNT set is assembled to individual order specification.
Rotiform PNT Design: Multi-Spoke Face with Machined Step-Lip Profile
The PNT face carries seven or eight uniform spokes — equal width, minimal taper, clean flat surfaces — set within a moderate concave face. The spoke arrangement creates even ventilation windows across the full face without biasing toward an open or dense appearance. The defining element is the stepped outer lip: at the barrel-to-lip transition, a machined step creates a visible shelf that adds dimension to the wheel in profile and provides a surface for two-tone finish treatments.
Rotiform PNT Engineering: Three-Piece Stepped Assembly
PNT construction: forged aluminum center, spun inner barrel, and stepped outer lip ring. The step in the outer lip is machined into the lip ring profile before assembly — it is not a post-assembly modification. This construction detail allows the step depth and position to be held to consistent dimension across the full lip circumference. Hardware: stainless bolts in counterbored positions along the inner barrel ring.
PNT CustomSpec Technical Notes
Construction: three-piece with stepped lip ring. Center: forged aluminum. Inner barrel: spun/machined. Outer lip: stepped machined ring. Hardware: stainless. Diameter, width, offset, bolt pattern: specified at order. Finish: selected from available options. Lead time quoted at order.
PNT CustomSpec Finish Options
Available treatments include Brushed Silver with Polished Step Lip, Polished Full Face, Brushed Gunmetal with Polished Step Lip, and Matte Black with Polished Step Lip. The step-lip design is most effective in Brushed Silver or Brushed Gunmetal with Polished Step Lip — the finish change at the step edge creates a bright band that frames the barrel and emphasizes the wheel's depth in profile.
PNT CustomSpec Applications
The PNT has been used on Audi S8, BMW 740i, and Jaguar F-Type platforms, where the stepped lip and brushed surface suit the vehicles' combination of performance and prestige. The design is equally appropriate for broader enthusiast builds where a premium, finished wheel appearance is the priority. Fitment confirmed by Rotiform for any vehicle at order.
Any Vehicle, Any Specification
The PNT CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Rotiform es una marca americana premium de llantas fundada en California en 2009, establecida como especialista en diseño de llantas monoblock multipiezas y personalizadas para el mercado del tuning de rendimiento y lujo. Desde diciembre de 2025, Rotiform forma parte de Blue Design Group, un holding que consolida marcas premium de llantas y diseño automotriz, aportando recursos adicionales de ingeniería y diseño al pipeline de desarrollo de Rotiform. La marca ha establecido una presencia en el motorsport a través de su papel como socio técnico de los equipos Ferrari Challenge y del programa GT, añadiendo credibilidad técnica que extiende la marca más allá de la escena del tuning callejero.
Hodoor adquiere las llantas Rotiform a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad