Bespoke three-piece forged wheel built to order in 3 custom finishes.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Especificaciones completas
Rotiform ROC-H CustomSpec introduces a hardened barrel variant of the ROC design — the H designation indicating a reinforced inner barrel specification selected for low-profile tire fitments and high-load applications. Where the base ROC serves standard-height tire builds, the ROC-H is engineered for setups where barrel deformation risk is elevated: very low aspect ratio tires, track-day use, or vehicles with higher corner weights. Each ROC-H is assembled to individual order specification.
ROC-H Design: ROC Spoke Geometry with H-Grade Barrel
The face design of the ROC-H matches the ROC platform — a moderate multi-spoke layout with consistent spoke width and controlled concave depth. The design change exists in the barrel component: the H-specification inner barrel uses a heavier wall section machined from a higher-alloy source material, providing the stiffness needed to resist lateral deformation in extreme use cases. From the outside the wheels appear identical; the structural difference is in the inner barrel and hardware torque specification.
ROC-H Engineering: Reinforced Three-Piece Assembly
ROC-H assembly: forged aluminum face center, H-specification machined inner barrel (heavier wall section), and machined outer lip ring, joined by stainless hardware torqued to elevated specification. The H-barrel's additional wall thickness adds marginal weight relative to the base ROC barrel but provides meaningful structural benefit in the specific use cases the wheel targets. CNC hub-centric bore maintains fitment precision.
ROC-H CustomSpec Technical Parameters
Construction: three-piece assembled with H-grade barrel. Center: forged aluminum. Inner barrel: H-specification heavier wall. Hardware: stainless, elevated torque spec. Diameter, width, offset, bolt pattern: specified at order. Available finish options confirmed at inquiry.
ROC-H CustomSpec Finishes
Surface options include Gloss Black, Brushed Gunmetal, Anthracite, and Polished. All finish combinations include the standard polished outer lip ring. Gloss Black with polished lip is the most requested combination for track-day builds; Brushed Gunmetal with polished lip suits prestige and luxury applications where the ROC-H is selected for its structural specification rather than visual drama.
Any Vehicle, Any Specification
The ROC-H CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Rotiform es una marca americana premium de llantas fundada en California en 2009, establecida como especialista en diseño de llantas monoblock multipiezas y personalizadas para el mercado del tuning de rendimiento y lujo. Desde diciembre de 2025, Rotiform forma parte de Blue Design Group, un holding que consolida marcas premium de llantas y diseño automotriz, aportando recursos adicionales de ingeniería y diseño al pipeline de desarrollo de Rotiform. La marca ha establecido una presencia en el motorsport a través de su papel como socio técnico de los equipos Ferrari Challenge y del programa GT, añadiendo credibilidad técnica que extiende la marca más allá de la escena del tuning callejero.
Hodoor adquiere las llantas Rotiform a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad