Bespoke three-piece forged wheel built to order in 5 custom finishes.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Especificaciones completas
Rotiform STR CustomSpec translates direct-drive racing wheel geometry into a road-going three-piece forged format. The spoke arrangement, spoke width-to-window ratio, and face depth are drawn from oval track and circuit wheel design — where material efficiency and structural directness govern spoke geometry — then executed in Rotiform's CustomSpec three-piece assembly to customer dimensional specification.
STR Design: Direct-Drive Racing Spoke Layout
The STR face carries six broad spokes originating from a wide hub flange, tapering to the outer rim with minimal curvature — a geometry that prioritizes load path directness from hub bore to hoop. Inter-spoke windows are wide enough to ventilate brake hardware without creating unnecessary stress concentration. The face runs minimal concave depth, consistent with race wheel design priorities. At the lip, the outer rim ring is machined bright on the step face, creating a contrast band between the body finish and the machined edge.
STR Engineering: Three-Piece Assembled Construction
STR construction comprises a forged 6061-T6 aluminum center, spun and machined inner barrel, and machined outer lip ring — assembled with aerospace-grade stainless hardware. Three-piece construction allows extreme width and offset combinations required for race applications while maintaining a standard center forging across the range. Each set is fabricated after order confirmation; Rotiform does not hold STR stock.
STR CustomSpec Specifications
Construction: three-piece assembled. Center: forged 6061-T6. Hardware: stainless steel. Diameter, width, offset, bolt pattern: specified at order. Front and rear dimensions confirmed separately for staggered setups. All machining held to hub-centric tolerance.
STR CustomSpec Finishes
Available: Polished, Matte Black, Brushed Silver, Gloss Gunmetal, and Satin White. The polished variant references the machined aluminum race wheels of the 1960s–1980s most directly. Matte Black provides a modern stealth appearance suited to current time-attack and track-day builds. Satin White delivers a distinctive livery-ready look for competition-inspired builds.
Any Vehicle, Any Specification
The STR CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Rotiform es una marca americana premium de llantas fundada en California en 2009, establecida como especialista en diseño de llantas monoblock multipiezas y personalizadas para el mercado del tuning de rendimiento y lujo. Desde diciembre de 2025, Rotiform forma parte de Blue Design Group, un holding que consolida marcas premium de llantas y diseño automotriz, aportando recursos adicionales de ingeniería y diseño al pipeline de desarrollo de Rotiform. La marca ha establecido una presencia en el motorsport a través de su papel como socio técnico de los equipos Ferrari Challenge y del programa GT, añadiendo credibilidad técnica que extiende la marca más allá de la escena del tuning callejero.
Hodoor adquiere las llantas Rotiform a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad