Three-piece forged wheel from Rotiform's made-to-order CustomSpec program. Available in 16-24" diameter with custom offset, bolt pattern, and finish options.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Gloss Black
Matte Black
Gloss Anthracite
Matte Anthracite
Gloss Silver
Matte Silver
Matte Gold
Matte Bronze
Brushed Gloss Silver
Brushed Gloss DDT
Brushed Matte DDT
Gloss Candy Bronze
Gloss Candy Gold
Brushed Gloss Candy Gold
Gloss Candy Rose Gold
Brushed Candy Copper
Brushed Candy Monaco Copper
Gloss Candy Red
Gloss Candy Blue
Gloss Candy Pink
Gloss Candy Teal
05 /Especificaciones completas
Rotiform TSF CustomSpec — Three-Piece Precision Forged for Prestige and Luxury Applications
Assembled Forged Construction with Stainless Hardware and Premium Finish Selection
Rotiform TSF CustomSpec targets prestige vehicles and luxury coupes where wheel construction quality and surface treatment matter as much as diameter and offset. The three-piece assembled format allows the TSF to deliver polished lips, matched barrel and center finishes, and extreme width-offset combinations that a monoblock forging cannot accommodate. Each TSF set is built to individual specification — center, inner barrel, and outer lip configured to the buyer's submitted chassis data.
Rotiform TSF Design: Refined Low-Spoke-Count Face with Polished Barrel Lip
The TSF presents a low-spoke-count face — typically five or six spokes — with wider individual spoke bodies and generous inter-spoke windows. The low count creates an open, airy face that suits prestige builds where showing the brake assembly is a visual asset. Spoke surfaces are precision-milled to consistent widths and chamfered edges. The outer lip is supplied polished as standard, creating a bright contrast band between the machined face and body finish.
Rotiform TSF Engineering: Three-Piece Assembled Construction
Three-piece assembly for the TSF means: a forged aluminum center section, a machined inner barrel, and a rolled-and-machined outer lip ring, joined by aircraft-grade stainless hardware seated in counterbores around the inner barrel circumference. This construction allows the lip diameter and barrel width to be changed independently of the center forging — critical for prestige vehicles where aggressive width and extreme negative offset combinations are common requirements.
TSF CustomSpec Technical Data
Construction: three-piece assembled (forged center, machined barrel, polished lip). Hardware: aircraft-grade stainless. Diameter, width, offset, bolt pattern: specified at order. The polished outer lip is standard; center finish is selected from the available options below. Lead time quoted at order.
TSF CustomSpec Finish Combinations
Center finish options include Matte Black, Brushed Gunmetal, Anthracite, and Polished Silver — each paired with the standard polished outer lip. Brushed Gunmetal center with polished lip creates a classic two-tone appearance well-suited to silver and grey vehicles. Matte Black center with polished lip provides maximum contrast for dark-colored prestige cars.
TSF CustomSpec Applications
The TSF has been fitted to Bentley Continental GT, Maserati Quattroporte, and Audi A8 L platforms, where its prestige construction and polished lip suit the vehicles' character. The three-piece format accommodates the wide, low-offset fitments common on luxury limousine builds. Rotiform confirms fitment for any vehicle through the ordering process.
Any Vehicle, Any Specification
The TSF CustomSpec can be ordered for any vehicle and any specification — not just the models listed above. Contact us with your vehicle make, model, and year to get the correct size, offset, and fitment confirmed before ordering.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Rotiform es una marca americana premium de llantas fundada en California en 2009, establecida como especialista en diseño de llantas monoblock multipiezas y personalizadas para el mercado del tuning de rendimiento y lujo. Desde diciembre de 2025, Rotiform forma parte de Blue Design Group, un holding que consolida marcas premium de llantas y diseño automotriz, aportando recursos adicionales de ingeniería y diseño al pipeline de desarrollo de Rotiform. La marca ha establecido una presencia en el motorsport a través de su papel como socio técnico de los equipos Ferrari Challenge y del programa GT, añadiendo credibilidad técnica que extiende la marca más allá de la escena del tuning callejero.
Hodoor adquiere las llantas Rotiform a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad