Forged touring line wheel with split 10-spoke TCR motorsport-inspired design and unrivaled OEM brake clearance for VW and Audi platforms. Available in 18" diameter.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Anthracite
Motorsport Gold
Race Silver
Satin Black
05 /Especificaciones completas
Apex TC-10RT - Forged Touring Line Wheel with TCR Motorsport Heritage for VW and Audi
Split 10-Spoke Design Engineered for Maximum Brake Clearance on VW/Audi Platforms
The Apex TC-10RT is a fully-forged touring line wheel designed from the ground up to solve the brake clearance problems faced by Audi and VW platforms featuring massive OEM 8-piston brakes. Its split 10-spoke design draws direct visual inspiration from the wheels used on the wide-body race cars Audi and VW ran in the legendary TCR touring car series — motorsport heritage translated into a tremendously functional forged wheel.
Unrivaled OEM Brake Clearance
The TC-10RT's spoke profile was specifically engineered to deliver as much inner brake clearance as possible without sacrificing structural strength. Certain fitments can accommodate any big brake kit on the market for these platforms, clearing every relevant brake scan in Apex's library — a first for an Apex design. No centering rings, spacers, or additional hardware required.
TCR Motorsport Heritage Design
The TC-10RT project was conceived by Apex's in-house VW/Audi market fitment expert, himself a dedicated VAG tuning enthusiast. The split 10-spoke layout evokes the wheels VW and Audi ran in the TCR series, translating that motorsport identity into a production forged wheel that nods at the heritage of these brands in a way no other wheel does. It is also designed to be compatible with OEM center caps for a clean, OEM+ look.
Side-Milled Spokes and Sprint Spec Inner Lip
The TC-10RT's spokes are side-milled for both aesthetic and functional benefit, removing excess weight from the spokes without compromising stiffness. The wheel also incorporates Apex's reinforced Sprint Spec inner lip for extra strength at the least-supported point on the wheel — making it a truly competition-grade forged wheel with remarkable durability engineered into its design.
Forged Monoblock Construction
Part of Apex's Touring Line, the TC-10RT is forged from aerospace-grade aluminum alloy in a one-piece monoblock construction. Its load rating exceeds JWL standards at 1,600 lbs, and at approximately 19.9 to 20.9 lbs depending on fitment, it offers excellent weight savings — roughly 8 lbs lighter than OEM wheels on the RS3, for example.
Direct Fitment for VW and Audi
Available in 18x8.5" ET43, 18x9" ET42, and 18x9.5" ET41 fitments, each engineered using Apex's library of 3D scans for a perfect fit on small-bore 5x112/57.1mm Audi and VW platforms. Compatible with all MK5 through MK8 VW models and Audi 8V RS3, TTRS, and non-RS Audi models without modification.
Available Finishes
The TC-10RT is offered in four finishes: Anthracite, Motorsport Gold, Race Silver, and Satin Black — giving passionate VW and Audi enthusiasts plenty of options to match their builds. The TC-10RT can be ordered for any vehicle and any specification - not just the models listed above.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Apex Wheels, operada por Aftermarket Performance Express Inc. y con sede en Pleasanton, California, fue fundada con una misión específica: diseñar llantas ligeras y aptas para pista, optimizadas para plataformas BMW y vehículos de rendimiento europeos. Este enfoque ha moldeado cada aspecto del desarrollo de productos de la marca, desde la geometría de radios elegida para despejar las envolventes de las pinzas de freno específicas de los BMW serie M y Sport, hasta los perfiles de offset que llenan las holguras de los arcos en vehículos europeos rebajados sin necesitar espaciadores. El resultado es una marca de llantas que la comunidad de plataformas europeas confía no como un compromiso, sino como una solución diseñada a propósito.
Hodoor adquiere las llantas Apex Wheels a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad