Forged enduro line 5-spoke wheel with 2100 lb load rating for BMW and Porsche platforms. Available in 18–21" diameters in four finishes.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Anthracite
Motorsport Gold
Race Silver
Satin Black
05 /Especificaciones completas
Apex Wheels VS-5RE — Enduro Line Five-Spoke Forged Wheel with 2100 lb Load Rating
High-Load Five-Spoke Enduro: 500 lb More Capacity Than the Sprint Line for SUVs and Heavy GT Builds
The Apex VS-5RE is a five-spoke, forged monoblock wheel from the Apex Enduro Line. The Enduro Line designation identifies a specific structural target: a 2100 lb per-corner load rating, which is 500 lbs higher than the VS-5RS Sprint Line equivalent. The VS-5RE carries the same five-spoke visual language as the VS-5RS but is forged to a thicker section profile throughout — heavier by design, because the vehicles it targets require that mass budget for structural compliance. The VS-5RE was developed specifically for BMW SUVs and X-series crossovers, Porsche Macan and Cayenne applications, and performance-oriented Tesla Model S/3/X platforms where OEM per-corner loads exceed the Sprint Line's rated capacity.
VS-5RE Manufacture: Enduro Line Forging Specification
Apex presses VS-5RE blanks from 6061-T6 billet under the same 10,000-ton forging process as the Sprint Line, but the spoke and barrel section dimensions are specified to the Enduro Line structural brief — which requires the wheel to pass JWL and VIA structural testing at 2100 lb rather than the Sprint Line's lower rated value. After T6 heat treatment, the five spokes are CNC-machined to their final profile. The spoke cross-section is visually similar to the VS-5RS but measurably thicker at the root-to-hub junction where the 2100 lb load requirement places the highest demand. Hub-centric bore and lug bore machining are performed to the same dimensional tolerance as Sprint Line production.
VS-5RE Sizing and Platform Focus
The VS-5RE is offered in 20-inch and 21-inch diameters to match the OEM wheel sizes of its target platforms. BMW X5 M and X6 M, Porsche Cayenne GTS, and Tesla Model S Plaid fitment data are published with confirmed brake clearance for OEM and common aftermarket caliper upgrades on each chassis. Five-lug bolt circles cover BMW 5x120, Porsche 5x130, and Tesla 5x114.3 configurations.
VS-5RE Finishes
Gloss Black, Anthracite, and Brushed Silver. The brushed silver option is calibrated for the VS-5RE's heavier spoke sections, using a broader brush pass than the VS-5RS's narrower spoke faces accommodate — producing a more uniform texture across the wider root area.
VS-5RE in the Enduro Line
The VS-5RE and SM-10RE form the Enduro Line pair: five-spoke and ten-spoke, both rated to 2100 lb. For five-spoke geometry at Sprint Line loads, the VS-5RS is the lighter option. For five-spoke geometry at Touring Line GT sizing, the VS-5RX provides a touring-focused alternative.
VS-5RE Technical Summary
Five-spoke forged monoblock. 6061-T6 aluminium. 2100 lb per-corner load rating. 20 and 21-inch diameters. Five-lug options. Gloss Black, Anthracite, Brushed Silver finishes. Published per-size weights.
Any Vehicle, Any Specification
The VS-5RE is available for BMW SUV, Porsche SUV, and Tesla platform applications. Contact Apex Wheels or an authorised distributor to confirm diameter, bolt pattern, offset, and finish availability for the VS-5RE on your specific vehicle.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Apex Wheels, operada por Aftermarket Performance Express Inc. y con sede en Pleasanton, California, fue fundada con una misión específica: diseñar llantas ligeras y aptas para pista, optimizadas para plataformas BMW y vehículos de rendimiento europeos. Este enfoque ha moldeado cada aspecto del desarrollo de productos de la marca, desde la geometría de radios elegida para despejar las envolventes de las pinzas de freno específicas de los BMW serie M y Sport, hasta los perfiles de offset que llenan las holguras de los arcos en vehículos europeos rebajados sin necesitar espaciadores. El resultado es una marca de llantas que la comunidad de plataformas europeas confía no como un compromiso, sino como una solución diseñada a propósito.
Hodoor adquiere las llantas Apex Wheels a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad