Apex Wheels VS-5RS is a forged Sprint Line monoblock wheel — the lightest wheel Apex makes. 10,000-ton forged 6061-T6, 17 to 20 inches, 6 finishes, for BMW, Porsche, Audi, Toyota, and more.
Acabados
Precio final, comprobación de encaje y estimación de entrega en 24 h.
03 /Especificaciones
Esta llanta está disponible en varios encajes. El tamaño final, el ET y el patrón de tornillos se confirman con nuestro gestor.
¿Necesitas medidas exactas para tu coche?
Incluiremos el encaje confirmado, la ficha técnica completa y la documentación disponible con tu presupuesto.

04 /Acabado
Cada acabado se aplica a mano y se revisa antes del envío. Los acabados a medida bajo petición añaden 2 semanas al plazo.
Anthracite
Brushed Clear
Motorsport Gold
Race Silver
Satin Black
Satin Bronze
05 /Especificaciones completas
Apex Wheels VS-5RS — Sprint Line Flagship: The Lightest Wheel in the Apex Catalogue
Five-Spoke Forged Monoblock Built Exclusively for Minimum Weight at Maximum Track Loads
The Apex VS-5RS is the flagship of the Apex Sprint Line and the lightest wheel Apex produces. It carries a five-spoke forged monoblock construction tuned to the minimum structural threshold Apex approves for circuit and time-attack use, then stops — no additional material, no decorative machining beyond what surface finish requires, no concession to weight for the sake of appearance. The VS-5RS exists for one purpose: getting the least rotating mass onto a BMW, Porsche, or European performance chassis while maintaining the structural integrity required to survive repeated hard-braking, high-lateral-load track sessions.
VS-5RS Manufacture: Pressed 10,000-Ton Forging, Minimum-Mass CNC Finish
Apex presses VS-5RS blanks under 10,000 tons from 6061-T6 aluminium billet, developing a closed-die grain structure that eliminates the internal porosity present in cast and flow-formed wheels. After T6 heat treatment, the five spoke profiles are CNC-machined to their final cross-section — which Apex specifies as the minimum section area that meets VS-5RS's structural rating at the most demanding size in the product range. No excess material is left for visual effect. The hub face, lug bores, and center bore are precision-ground for hub-centric fit. Published per-size weights for the VS-5RS are the reference figure against which every other Apex wheel is measured.
VS-5RS Sizing and Fitment
Offered in 17-inch through 20-inch diameters, the VS-5RS covers more of the BMW and Porsche chassis range than any other Sprint Line wheel. Apex publishes confirmed fitment data for every available size, including caliper clearance for Brembo six-piston front assemblies on 911 GT3, AP Racing circuit kits on E46 M3, and BMW M Performance calipers across M2/M3/M4 generations. Five-lug bolt circles are available for the full BMW and Porsche hub specification range.
VS-5RS Finishes
Satin Black and Brushed Clear. Two finishes only — consistent with the VS-5RS's weight-first development brief. Additional finish options add processing mass that conflicts with the wheel's raison d'être.
VS-5RS and the Sprint Line
The VS-5RS sits at the top of the Sprint Line alongside the SM-8RS and SM-10RS. Where the SM series uses eight or ten spokes for a denser face composition, the VS-5RS uses five spokes to maximise face openness — an aesthetic preference that also marginally reduces total material for a given structural rating. For drivers who need the VS-5RS's five-spoke design at an increased load rating for heavier vehicles, the VS-5RE Enduro Line variant provides a 2100 lb per-corner rating.
VS-5RS Technical Summary
Five-spoke 10,000-ton forged monoblock. 6061-T6 aluminium. 17 to 20-inch diameters. Five-lug options. Satin Black and Brushed Clear only. Published per-size weights and load ratings.
Any Vehicle, Any Specification
The VS-5RS is available for a wide range of BMW and Porsche chassis configurations. Contact Apex Wheels or an authorised distributor to confirm diameter, bolt pattern, offset, and current availability for the VS-5RS on your vehicle.
06 /Certificación
La documentación varía según el modelo y el país. La comprobamos para tu llanta antes del pago y te decimos de antemano qué hay disponible.
01
Claridad sobre lo que recibes
Cada presupuesto indica exactamente qué recibes: marca, modelo, acabado y documentación.
02
Documentos verificados antes del pago
Confirmamos qué certificados (TÜV, JWL, VIA) existen para tu modelo y los enviamos con el presupuesto.
03
Encaje verificado
Offset, PCD y holgura de frenos comprobados para tu auto.
04
Matriculación en tu país
Dinos dónde está matriculado el auto: comprobaremos qué se necesita y qué podemos aportar.

¿Necesitas documentación para tu llanta?

Apex Wheels, operada por Aftermarket Performance Express Inc. y con sede en Pleasanton, California, fue fundada con una misión específica: diseñar llantas ligeras y aptas para pista, optimizadas para plataformas BMW y vehículos de rendimiento europeos. Este enfoque ha moldeado cada aspecto del desarrollo de productos de la marca, desde la geometría de radios elegida para despejar las envolventes de las pinzas de freno específicas de los BMW serie M y Sport, hasta los perfiles de offset que llenan las holguras de los arcos en vehículos europeos rebajados sin necesitar espaciadores. El resultado es una marca de llantas que la comunidad de plataformas europeas confía no como un compromiso, sino como una solución diseñada a propósito.
Hodoor adquiere las llantas Apex Wheels a través de proveedores verificados y confirma el ajuste, el acabado y las opciones de entrega antes de enviar el presupuesto.

Usamos cookies para que el sitio funcione correctamente. Al seguir navegando, aceptas su uso. Política de privacidad